Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Haltom City
If you’re calling around Haltom City for gate installation, you probably want a straight answer on cost, timeline, and whether the company actually knows the difference between a subdivision fence gate and a high-cycle commercial slide gate running 50 times a day. Here’s the honest version: most residential driveway gate installations in Haltom City run between $2,800 and $6,500 depending on gate type, post condition, and automation. We’ve been doing this work long enough to know that the gate itself is only half the job. The post footings, the clay soil they sit in, and the operator you choose matter just as much as the steel. Call Victor and the team at (806) 484-1837 for a free, written estimate before you commit to anything.
We are Gate Installation specialists serving Haltom City and the surrounding Tarrant County communities with a straightforward approach: quote the job, do it right, stand behind it in writing for 90 days. No surprises on the invoice, no tech who disappears halfway through, no gate that binds when the August heat hits.
Why Haltom City Picks Ironworks Gate Co.
You could hire a general handyman, sure. But the gates we’re called out to fix in Haltom City are rarely simple. We’re the company that shows up when someone else already “fixed” it last year and it’s sagging again. Ironworks Gate Co. has been doing this work for over 42 years, founded by people who understand both the welding side and the automation side. That matters because half the techs in this trade are good with metal but lost on a control board, and the other half can program a remote but can’t weld a hinge to save themselves. We do both.
Every job gets the 90-Day Done Right Promise, our written standard on every single gate we install or repair. If something isn’t right, we come back and make it right. No paperwork, no arguing, no exceptions. We also answer the phone with a live person 24 hours a day, 7 days a week. When a gate fails at 6 a.m. and your car is trapped on the wrong side of your own driveway, you do not want to leave a voicemail and hope. You’ll reach a person who can dispatch someone to Haltom City the same day in most cases.
Our Gate Installation Services in Haltom City
Sliding Gate Installation
Sliding gates are the workhorse of Haltom City’s commercial lots along Denton Highway and NE 28th Street, but they also make sense for residential driveways with limited swing clearance or steep approach angles. A new sliding gate with track, operator, and safety loops on a Haltom City residential lot typically runs $3,500 to $7,800. Commercial installations on heavy-use lots run $6,000 to $15,000 or more depending on the gate length, speed, and duty-cycle requirements. We design the track, footings, and operator package around how many cycles per day that gate will actually see.
Swing Gate Installation
Single and double swing gates remain the most common residential style in Haltom City, especially on the older ranch houses built between the late 1940s and early 1970s. We install both single-leaf and driveway-width double-leaf systems, and we always reset the post footings when the existing posts are out of square. A single swing gate with manual hardware starts around $1,800; with an automated operator, expect $3,200 to $6,000 installed.
Pedestrian Gate Installation
Separate pedestrian gates are a practical addition to any Haltom City property with a driveway gate, because opening a full driveway gate every time the mail arrives or the grandkids walk over is hard on the operator and the hinges. We install matching pedestrian gates with self-closing hinges, keyed locks, and powder-coated steel or aluminum frames. A basic steel pedestrian gate with hardware runs $600 to $1,400 installed, depending on width and hardware selection.
Security Gate Installation
For Haltom City customers who want something more substantial than a standard driveway gate, we build and install security gates with heavier steel tube frames, anti-lift brackets, and commercial-grade operators. These gates show up in two places around Haltom City: the commercial lots that need real perimeter control, and residential properties with detached garages or alley access that need tighter control. Security gate packages start around $4,500 for a basic heavy-frame installation and go up with access control options like keypads, intercoms, and remote monitoring.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We’re trained and certified on nine major gate-automation brands, but on Haltom City jobs we most often spec BFT and Viking for commercial slide-gate operators, and Linear for residential swing and slide applications. At the NE 28th Street commercial lots, we commonly see operators cycling dozens of times daily under truck traffic, which demands an operator rated for continuous or high-duty use; that’s not what the big-box store version is built for. For older residential systems, especially legacy DoorKing units that are still hanging on after 20 years, we’ll give you an honest read on whether a repair makes sense or whether replacement is the cheaper move over the next three years. We stock common parts locally for Haltom City customers, so we’re not waiting on a warehouse in another state to get your gate moving again.
Common Gate Installation Problems We See in Haltom City Homes
- Post heave from expansive clay soil. Tarrant County sits on black-clay soil that shrinks hard in summer drought and swells after rain. Posts set too shallowly move with that cycle, and a gate that was square in May is binding by August. We drill footings below the active clay zone so the post stays put, which is the only real fix that lasts more than one season.
- Corroded original hinge posts on 1950s-1970s chain-link gates. Many Haltom City ranch homes still have their original galvanized chain-link gates. The hinge posts are so rusted that modern replacement hinges don’t step down to the old post diameter, which means a proper fix requires setting a new post, not just swapping hardware.
- High-cycle commercial slide gates with worn rack teeth and limit switches. The salvage yards and used-car lots along Denton Highway run their gates 40-50 times a day, every day. Limit switches burn out, rack teeth shear, and tracks fall out of alignment quarterly on the busiest lots. We spec operators built for that duty cycle and set the track so it doesn’t walk.
- Gates hung before modern entrapment-protection standards existed. If your Haltom City gate predates the UL 325 photo-eye requirements, it may not have entrapment protection at all. That’s a safety issue, not a cosmetic one. A closing gate that doesn’t reverse on obstruction can hurt a kid, a pet, or an adult who misjudges the timing. We’ll tell you plainly when a retrofit is feasible and when a new operator is the only correct answer.
Pricing for Gate Installation in Haltom City, TX
Let’s get specific, because you deserve that. A single-leaf manual swing gate on steel posts: $1,800 to $2,600. A double-leaf automated driveway gate: $4,200 to $7,500. A sliding gate on a residential lot: $3,500 to $6,800. A commercial slide gate with high-cycle operator and safety loops: $6,000 to $15,000+. A pedestrian gate: $600 to $1,400. These ranges cover typical Haltom City installations with proper post footings drilled below the clay line. What changes the final number: gate width and height, steel gauge and finish, operator brand and duty rating, whether we’re reusing existing posts or setting new ones, and access-control options like keypads, intercoms, or vehicle loop detectors. Every quote is written, detailed, and agreed to before a single bolt is turned. You will not get a surprise invoice from us. Victor walks through the numbers with you personally.
We Also Serve Cities Near Haltom City
Beyond Haltom City proper, our technicians regularly run calls in Gate Installation in Haltom City‘s neighboring communities: North Richland Hills, Hurst, Keller, and Bedford. If you’re in one of those areas and need a straight answer on a gate, call (806) 484-1837 and we’ll tell you honestly what the job needs and what it costs. Free estimate, written down, no pressure.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Haltom City
Yes, most older swing gates in Haltom City can be retrofitted with current UL 325 photo-eyes and reversing-edge sensors without replacing the gate itself, provided the gate frame and hinges are structurally sound. If the gate is sagging, cracked, or the posts are heaving, retrofitting safety sensors onto a failing frame is a false economy. The correct order of operations is to make the gate structurally sound first, then add the entrapment protection. Call (806) 484-1837 and Victor will assess your gate honestly.
Your posts are heaving because they were set in shallow footings that sit inside the active zone of Tarrant County’s expansive black-clay soil. That soil shrinks dramatically during summer droughts and swells after rain, and each cycle moves the post a little more. The permanent fix is to reset the posts in concrete footings drilled below the active clay zone, typically 36 to 48 inches deep in Haltom City soil, so the post sits in stable ground. A shallow re-set or pack-and-shim job will move again by the following summer.
For the commercial slide gates along Denton Highway and NE 28th Street, we typically spec Viking operators because their duty-cycle ratings handle 40 to 60 cycles per day without overheating, and their gear-drive systems stand up to truck-scale abuse better than the residential-grade FAAC swing operators. FAAC makes excellent swing-gate operators, and on a residential Haltom City swing gate that cycles 10 times a day, FAAC is a solid choice. The right answer depends on how many times a day the gate opens and what’s driving through it, not on brand loyalty. We’ll spec the operator for the duty cycle your gate actually sees.
On Haltom City’s post-war ranch houses, it’s usually the post, not the panel. Original gate posts on those properties have spent 50 to 60 years in clay soil that shifts seasonally, and the posts have typically tilted out of plumb or the hinges have corroded to the point of sloppiness. A gate panel is rarely bent enough to scrape unless a vehicle backed into it. We’ll put a level on it, watch how it hangs, and tell you which component actually failed. If it’s the post, you fix the post. If it’s the panel, you fix the panel. We don’t sell parts you don’t need.
For most residential driveway gates in Haltom City, a keypad is sufficient for day-to-day entry. But a vehicle loop detector adds a meaningful layer of convenience and safety: it detects your car approaching and opens the gate without you rolling down the window, and it detects a vehicle sitting in the gate’s path so the gate won’t close on it. On commercial lots along Denton Highway and NE 28th Street, we recommend loop detectors on both sides as standard practice. The cost difference for a residential loop is roughly $400 to $700 on a new installation, and we’ll explain during the quote whether your driveway layout benefits from one. Call (806) 484-1837 and Victor will walk you through it, free of charge.
Contact Ironworks Gate Co. today. Call (806) 484-1837 for a free written estimate on Gate Installation in Haltom City. We’ll answer the phone, show up when we say, settle the price before any work begins, and stand behind the finished job with a written 90-Day Done Right Promise.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haltom City and the surrounding Tarrant County communities.