Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Irving
If your Irving gate is sagging, dragging, or refusing to close, the answer usually comes down to two things: worn parts or a structural problem that welding solves. Gate hinge replacement in Irving typically runs $220-$480 per pair, depending on gate weight and post condition. Post replacement averages $650-$1,400 when Irving’s clay soil has heaved a post out of plumb. We answer calls at (806) 484-1837 with a live person, 24 hours a day, and we schedule most Irving repairs the same week, often the same day for urgent jobs.
Ironworks Gate Co. has spent over 42 years working on gates exactly like the ones across Irving, from the ornamental swing gates off MacArthur Boulevard to the slide gates guarding Las Colinas corporate entrances. We know this city’s soil, its HOA approval requirements, and the legacy operators still running in its older gated communities. If your gate is failing, you want a crew that fixes it once and stands behind the work in writing. That’s us.
Why Ironworks Gate Co. Is Irving’s Preferred Gate Parts & Welding Company
Irving homeowners call us because the gate is the one moving part of their property they cannot afford to get wrong. A gate that sticks open at 2 a.m. is a security problem. A gate that strains its operator every cycle is a $900 motor waiting to die. We have fixed both, thousands of times, across Valley Ranch, Las Colinas, and the established neighborhoods south of Highway 183.
Our technicians know the difference between a hinge replacement on a 1980s tubular-steel gate and a custom welding job on a 400-pound ornamental panel. Both are routine here. The Gate Parts & Welding work we do in Irving ranges from re-welding broken pickets on estate driveways to full post replacements at HOA entrances where the management company needs the gate operational before morning rush hour.
Every job is protected by our written 90-Day Done Right Promise. If something is not right, we come back and make it right. No paperwork, no arguing. That guarantee is on every hinge, every weld, every post we set in this city.
Victor Salinas founded this company on a simple principle: do the job correctly the first time, charge what you quoted, and answer the phone. That is why Irving customers keep our number. And why they pass it to their neighbors.
Our Gate Parts & Welding Services in Irving
Hinge Replacement
Irving’s Blackland Prairie clay is not kind to gate hinges. The soil expands when wet and shrinks when dry, and over a few seasons a hinge post can move enough to throw an entire swing gate out of alignment. The symptom is usually a gate that drags at the latch side or sags visibly. Hinge replacement in Irving typically runs $220-$480 per pair, including labor and heavy-duty barrel or bearing hinges rated for the gate’s weight. We weld the new hinges on rather than bolting through thin tubing where the metal has already fatigued.
Post Replacement
When a hinge post has heaved or leaned more than a few degrees, no hinge swap will fix it. The post itself has to come out, and in Irving that usually means digging through dense clay that has a grip like concrete when dry. Post replacement here runs $650-$1,400, depending on depth, gate weight, and whether we need to pour a larger footing or add a steel plate to brace the post against future movement. This is the fix that stops the problem for good, not for six months.
Rail Repair
Slide gates in Las Colinas and Valley Ranch ride on rails and rollers that take a beating from Irving’s soil movement. When a rail section twists or a splice breaks, the gate starts to jump, grind, or stall. Rail repair typically starts around $300 and runs up based on rail stock and how much straightening or replacement is required. We carry rail sections, rollers, and splice kits in our trucks so most Irving rail repairs are done in one visit.
Custom Welding
Some Irving gates were installed forty years ago and no longer have replacement parts available from any catalog. That is where custom welding earns its keep. We rebuild broken gate frames, fabricate mounting brackets for retrofit operators, and replace rusted-out sections of ornamental steel with matched material. Custom welding jobs in Irving start around $180 for a simple bracket or picket repair and scale up for full frame rebuilds. The quote is always agreed before we strike an arc.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
Our crews are trained and equipped on nine gate automation brands, and in Irving that breadth matters. Las Colinas HOA communities installed a lot of FAAC and Elite swing operators during their 1980s and 1990s buildout, and those units have specific parts ecosystems that stymie generalist shops. We also service Linear, Viking, and Ghost Controls openers on gates of every age. When your Irving gate uses a legacy operator and needs a new control board or limit switch, we can source the part and have it installed without waiting on a supply order from a shop that does not know the brand. That is the advantage of being a gate specialist, not a handyman who also does gates.
Common Gate Parts & Welding Problems We See in Irving Homes
- Heaved hinge posts on clay soil. Irving sits on expansive clay that swells and shrinks with every North Texas rain cycle. Posts move, gates lean, and operators strain until something strips. We set posts below the active zone and brace the footing.
- Legacy FAAC and Elite operator failures in Las Colinas. Those 1980s and 1990s swing-gate operators are now decades past their design life. Control boards fail, limit switches corrode, and generalist shops misdiagnose the symptom as a motor problem when the real issue is a $120 board.
- Seized gearboxes and cracked hydraulic lines after ice events. Winter Storm Uri was hard on Irving gates. Operators not rated for sustained subfreezing temperatures developed cracked hydraulic lines and seized gearboxes, and many of those failures did not show up until the first hot week of spring.
- Slide gate rollers popping off the track after heavy rain. When Irving’s clay expands after a good soaking, slide gates can shift laterally, and roller brackets that were marginal start to fail. The fix is often a welded bracket reinforcement, not just a new roller.
Pricing for Gate Parts & Welding in Irving, TX
Here is what Irving homeowners can expect to pay for common gate welding and parts work:
- Hinge replacement: $220-$480 per pair
- Post replacement: $650-$1,400
- Rail repair: $300-$900
- Custom welding: $180-$1,500 depending on scope
- Roller replacement: $140-$320 per gate
- Latch and lock repair: $120-$280
Your price is quoted and agreed before any work starts. No one likes a surprise invoice, and we do not write them. For Irving jobs that involve HOA coordination or shared entry systems, we can walk the property with the management company and put the plan on paper before we begin. Call (806) 484-1837 for a free estimate.
We Also Serve Cities Near Irving
Ironworks Gate Co. serves Irving and the surrounding communities, including Grand Prairie, Coppell, Euless, and Grapevine. If your gate is within the Dallas-Fort Worth metro, there is a good chance we are already working in your neighborhood this week. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Irving locally.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Irving
Yes, most Las Colinas HOA communities require architectural or management approval for any exterior change, including gate repairs that alter appearance, color, or hardware. Hinge replacements that use matching hardware often sail through, but welded post replacements or custom fabrication may need a written description and material samples. We coordinate directly with your management company and can provide the spec sheet and material details they ask for, so the approval does not slow down the repair. Call (806) 484-1837 and we will walk you through what your HOA is likely to request.
In Irving, it is usually the hinge post. The clay soil here heaves and shifts, and a post that has moved even a couple of degrees makes the gate fight the operator on every cycle. The motor strains because the geometry is wrong, not because the motor is failing. We check the post plumb, the hinge wear, and the operator draw before recommending anything. Replacing a motor without fixing the post just destroys a second motor. Call (806) 484-1837 for a diagnosis that separates the structural problem from the mechanical one.
Yes. We stock and source FAAC control boards, limit switches, and capacitors for legacy models still running across Las Colinas. If the board model is obsolete, we can often cross-reference to a compatible replacement or retrofit the operator with a new control package while keeping the original motor and gate. You do not have to replace the entire gate because one circuit board failed. Call (806) 484-1837 with the model number from the operator housing and we will confirm parts availability.
Yes, this is one of the most common Irving gate failures. The soil absorbs water and expands, which shifts the gate’s vertical posts. A gate that was aligned in August can be out of alignment by October. The rollers take lateral load they were never designed to take, and the roller brackets fatigue. The durable fix is welded bracket reinforcement and a post inspection, not just installing another set of rollers. Call (806) 484-1837 and we will look at the whole track, not just the part that popped off.
We stage the work so the gate is out of service for the shortest possible window, usually a single day. For swing gates, we brace the gate panel while the post is out and can re-hang it by early afternoon in most cases. For high-traffic HOA entrances, we coordinate with the management company to schedule the work during low-traffic hours and keep pedestrian or secondary access open throughout. Some communities in Las Colinas have guard access we can coordinate with. Call (806) 484-1837 and we will put a plan on paper for your board or management company.
Gate Repairs in Las Colinas: HOA Approval and Legacy Hardware
Irving is not like the suburbs to the east. Las Colinas packed thousands of gated residential entrances, HOA-managed access points, and corporate security gates into a few square miles, and many of those gates were installed when the development was built out in the 1980s and 1990s. That means two things for anyone who owns or manages one: the hardware is now 30 to 40 years old, and the HOA has a defined process for approving exterior work.
This is the reality of gate work in Irving. A hinge replacement is not just a hinge replacement when the HOA needs material specs before they will sign off. A post replacement is not just a post replacement when the gate has to stay operational for residents during the work. We do this kind of job every week. On a guarded entry off North O’Connor Boulevard in Las Colinas, our crew replaced a sagging FAAC swing gate after the hinge post had heaved out of plumb on Irving’s expansive clay. We welded a new steel post footing, re-hung the 14-foot ornamental panel, and reconnected the legacy operator to its new loop detector and safety photocell, all while coordinating with the management company to keep resident keypad entry active throughout the work.
The legacy FAAC and Elite operators installed during Las Colinas’s buildout are a specific challenge. Sourcing boards, limit switches, and capacitors for those European-brand units still trips up shops coming in from Dallas proper. We know the parts, we know the quirks, and we know how to keep the resident keypads working while the post is being welded. That is the difference between a gate company that works in Irving every week and one that drives in, guesses, and drives out.
If your gate post is heaving, your weld has cracked, or your HOA gate is down and residents are calling, call (806) 484-1837. We will come out, assess the gate and the soil, give you a written price, and do the work so you never have to think about it again. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Irving and the Dallas-Fort Worth metro since 1984.