Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Grapevine
A new driveway gate in Grapevine typically runs $4,800 to $14,500 installed, depending on the gate style, operator, and site conditions. Most residential installations are completed in one day, with the operator and safety system set up the same visit. If you’re planning a gate for a home in 76051 or 76099, the first step is a free on-site measure and a written quote, so you know the exact number before any work begins. Call (806) 484-1837 and a live person will answer.
We work on gates throughout Grapevine every week, from the HOA communities along Hall-Johnson Road to the older streets off Main Street and the lakeside subdivisions south of Murrell Park. Our crews know the local right-of-way rules, the clay soil behavior, and the hardware that holds up near the lake. When we quote a gate, we quote it for Grapevine conditions, not for a generic Texas driveway.
Why Ironworks Gate Co. Is Grapevine’s Preferred Gate Installation Company
Founded in 1984, Ironworks Gate Co. has spent over 42 years doing one thing: driveway and estate gates. We’re not a fencing company that also hangs a gate now and then. We weld, we wire, we automate, and we stand behind the finished job with a written 90-Day Done Right Promise. If something isn’t right, we come back and make it right. No paperwork, no arguing.
Victor Salinas leads our crews, and every technician who shows up at a Grapevine home is background-checked, uniformed, and trained on nine gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters when a Grapevine homeowner has an existing opener we didn’t install and wants a new gate built around it. We don’t guess. We know the wiring, the limits, and the failure points.
Our Grapevine customers tend to be people who’ve lived in their homes twenty years or more and plan to stay another twenty. They’ve been through contractors who quoted low and disappeared. We hear that story often enough to know why our written quote, agreed before a single bolt is turned, earns repeat calls and referrals across 76051.
Our Gate Installation Services in Grapevine
Grapevine’s residential landscape is a mix of 1980s-to-2000s brick-veneer subdivision homes, many with HOA-governed entry gates, and older properties along the Historic Main Street corridor with ornamental ironwork that deserves period-sensitive handling. Our Gate Installation team sizes every job to the site and the governing documents. Here’s what we install most often in Grapevine:
Driveway Gate
A driveway gate in Grapevine is usually one of two situations: a single-family home with a wide curb cut where a swing or slide gate will work, or a shared driveway serving two or three houses where the gate serves everyone. Shared driveways are common in older Grapevine subdivisions, and they change the design. The gate has to open without crossing a neighbor’s platted right-of-way, and both houses need reliable access while we work. We handle that coordination so the gate never locks out a neighbor.
Sliding Gate
Sliding gates are the right answer on many Grapevine properties where a swing gate simply won’t fit. That’s common on corner lots, on driveways with a steep grade toward the street, and on shared driveways where a swing path would cross a property line. A slide gate rides on a track and a rack-and-pinion system, which means the footing work has to be right from day one. More on that below, because Grapevine’s soil makes it the single biggest factor in how long a slide gate stays square.
Swing Gate
Single and double swing gates remain the most popular choice for Grapevine homes with a flat or gently sloped driveway apron and room for the leaf to open fully onto the owner’s property. We install both ornamental iron and steel tube frame designs, and we can match the style of an existing fence or neighbor’s gate. Before we quote a swing gate in Grapevine, we check the HOA guidelines and the survey to confirm the swing path stays on your lot. Some local HOAs enforce this through the city, and a gate that swings over the line is a violation, not a preference.
Pedestrian Gate
Pedestrian gates rarely get the attention they deserve on a Grapevine job. Our crews set the post for the pedestrian gate at the same time we set the driveway gate posts, so both gates work on the same plane and the same latch line. If you need keypad entry on both, we tie them into one access system. On busy mornings, it’s the pedestrian gate your family actually uses, and it should operate as smoothly as the big one.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Grapevine
We install and service LiftMaster, FAAC, and Mighty Mule operators regularly in Grapevine, and we stock parts for those lines in our DFW service vehicles so we’re not waiting on a distributor to get your gate running. LiftMaster dominates local residential installs for its reliability and support. FAAC is our usual recommendation on high-cycle commercial gates along TX-114 and TX-121. Mighty Mule is a practical choice for lighter residential gates where a homeowner wants simple, proven automation. Whatever opener your gate calls for, we install it and stand behind it in writing.
Common Gate Installation Problems We See in Grapevine Homes
- Swing gates installed without checking the HOA’s platted right-of-way. We see this too often in Grapevine subdivisions: a gate leaf swings over a neighbor’s property line and the HOA or city flags it. That’s a tear-out and redo. We check the survey before we dig.
- Post footings that heave from Blackland Prairie clay. Grapevine’s expansive clay soil moves a lot between wet springs and 100-degree summers. A footing poured too shallow heaves, the gate sags, and the safety photocells misalign. We size footings for this soil, not for a textbook.
- Residential-grade operators on airport-corridor commercial gates. Hotels and conference centers along TX-114 and TX-121 in Grapevine run their gates 300 or more cycles a day. A residential operator burns out in months. We spec high-cycle operators like FAAC or LiftMaster commercial units and heavy-duty rack and pinion to match the actual duty cycle.
- Rust-through on iron gates near Grapevine Lake. Lakeside subdivisions off Fairway Drive and the coves along the south shore deal with persistent lake-effect humidity. Hinges and lower frame rails rust at the weld points in five to seven years, sometimes faster. We prep and coat those areas differently on new installs near the water.
Pricing for Gate Installation in Grapevine, TX
A standard single swing gate in Grapevine, including the operator, keypad, and safety photocells, runs roughly $4,800 to $8,200. A double swing gate with ornamental iron panels and a LiftMaster operator typically lands between $7,500 and $12,000. Sliding gates cost more because of the track, roller system, and footing work: expect $9,000 to $14,500 for a steel frame slide gate sized for a full driveway opening.
Here’s a clearer breakdown for Grapevine’s market:
- Single swing gate, steel or iron, with operator: $4,800-$8,200
- Double swing gate, ornamental iron, with operator: $7,500-$12,000
- Sliding gate, steel frame, rack-and-pinion, operator: $9,000-$14,500
- Pedestrian gate with keypad access: $1,200-$2,800
- High-cycle commercial operator (spec for TX-114/TX-121 corridor): add $2,500-$5,000 over residential hardware
The price is quoted and agreed before any work starts. No surprises on the bill. Call (806) 484-1837 for a free measure and a written estimate for your Grapevine property.
We Also Serve Cities Near Grapevine
Ironworks Gate Co. serves the communities around Gate Installation in Grapevine including Southlake, Colleyville, Coppell, and Euless. If you’re in a neighboring city and need a gate built or repaired, the same crew and the same written promise apply.
Serving Grapevine, TX - Our Local Coverage Area
We’re based in the Grapevine area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Grapevine
Most Grapevine subdivisions with an HOA require written design approval before a driveway gate goes in, and some require a city permit as well. The HOA will typically review height, setback from the street, and the direction the gate opens. We handle the application paperwork and meet the design standards the HOA sets, which saves Grapevine homeowners from installing a gate that gets flagged later. Call (806) 484-1837 and we’ll check your subdivision’s specific rules as part of the quote.
Automatic gates in Grapevine need entrapment protection because federal safety standards require photo eyes and contact edges that prevent a gate from closing on a person, pet, or vehicle. That’s not optional equipment on any new install in Grapevine. We size the safety system to the gate’s width and weight so it stops and reverses properly, and we test it before we leave.
Yes, and in Grapevine that’s a common solution. On shared driveways, corner lots, or homes with a short front setback, a sliding gate sits on a track and moves parallel to the fence line instead of swinging into the yard or over a neighbor’s property. We set a slide gate on a shared driveway off Fairway Drive where a swing gate would have crossed onto the easement, and kept the pedestrian gate working for both houses during the entire install.
Homes near Grapevine Lake live with persistent humidity from the water, and ornamental iron gates there rust at hinges and weld joints in five to seven years, roughly half the lifespan of the same gate in a drier part of 76051. On new installs near the lake, we specify heavier-gauge hinges, seal the welds, and apply a coastal-grade primer before the finish coat. It costs a little more up front and lasts years longer here.
Gates along TX-114 and TX-121 in Grapevine routinely run 300 or more open/close cycles a day from shuttle vans, delivery trucks, and hotel traffic. A residential-grade opener will not survive that. We spec high-cycle FAAC or LiftMaster commercial operators with continuous-duty motors and size the post footings accordingly. If your Grapevine commercial gate is getting a new operator, call (806) 484-1837 for a free evaluation and a quote before you buy hardware.
Call Ironworks Gate Co. for Gate Installation in Grapevine
If you’re ready to plan a new gate for your Grapevine home, call (806) 484-1837. A live person answers, day or night. We’ll schedule a free on-site measure, check your right-of-way and HOA requirements, and give you a written price before any work begins. Done right, backed in writing, and built to hold up to Grapevine’s soil, sun, and lake air. That’s the only way we work.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Grapevine and the surrounding DFW communities since 1984.