Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Southlake
Gate installation in Southlake is rarely a simple bolt-and-hang job. Most homes here sit on half-acre to multi-acre lots with custom ornamental iron or steel driveway gates, often 12 to 18 feet wide, paired with automation and entry systems. A new gate in Southlake typically runs $4,800 to $18,000 installed, depending on leaf size, material, operator type, and access control integration. We coordinate dispatch from our Dallas-Fort Worth office, and our crews reach Southlake the same day you call in most cases. Call (806) 484-1837 for a free measure and written price.
Why Ironworks Gate Co. Is Southlake’s Preferred Gate Installation Company
Southlake homeowners tend to do their homework before hiring a contractor, and they have every reason to. Many have lived here for twenty-plus years and remember the last outfit that let them down. What we hear most from customers along Southlake Boulevard and in neighborhoods off White Chapel is that they want a gate done once, done correctly, and guaranteed in writing. That is exactly how we work.
Victor Salinas leads our crews. Every technician is background-checked and uniformed, and every job is protected by our 90-Day Done Right Promise. If something is not right, we come back and make it right. No paperwork, no arguing. It is a written guarantee applied to every gate job we complete. Southlake is one of the few places in Texas where a gate company genuinely cannot afford to cut corners: the gates here are too heavy, too custom, and too visible. We treat that as a mark of respect for the work.
Our Gate Installation Services in Southlake
We specialize exclusively in driveway and estate gate work. That scope covers Gate Installation for new builds and full replacements, gate repair, motors and openers, access control, parts, and welding. For Southlake properties, the most common installations fall into three categories below.
Driveway Gate Installation
In Southlake, a driveway gate is almost always ornamental iron or steel, automated, and built to match the architecture of the home behind it. We install single and double swing gates, sliding gates, and cantilever designs. Most Southlake driveway gates we install are custom-fabricated to match an existing fence or entry feature, and we handle the full run from footing to final automation programming.
Pedestrian Gate Installation
Many Southlake estates pair a wide driveway gate with a matching pedestrian gate for foot traffic. These are typically narrower, lighter, and equipped with a keypad, card reader, or video intercom. We hang them square, set the posts deep enough to handle the clay soil movement, and integrate the access hardware so the pedestrian and vehicle gates work together on one system.
Sliding Gate Installation
Sliding gates make sense on Southlake lots where a long, straight driveway leaves no room for a swing arc. We install rack-and-pinion sliding gates, cantilever slides, and V-track systems all rated for the weight of solid steel or iron construction. A properly installed slide gate on a 20-foot opening will run quietly and track true for years, even on ground that shifts with the seasons.
Swing Gate Installation
Swing gates remain the standard in Southlake estate neighborhoods. Double bi-parting swing gates on 16- to 20-foot openings are the most common configuration we install. The critical work happens below grade: footings poured wide and deep enough to resist the expansive clay movement, with posts plumbed and braced before the leaves ever get hung. Skip that step and the gate sags within two seasons. We do not skip it.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southlake
Our technicians are trained and equipped on nine gate-automation brands, including Viking, Linear, Ghost Controls, and DoorKing. That matters in Southlake because existing systems here skew toward higher-end commercial-grade operators. We stock common replacement parts for these brands locally, which means fewer return trips and fewer days waiting on a shipped component. When a custom bi-parting gate from the late 1990s needs a new operator, we can match the existing leaf weight and geometry rather than forcing an off-the-shelf unit that will burn out early.
Common Gate Installation Problems We See in Southlake Homes
- Shifting hinge posts from black-clay soil movement. The expansive clay under Tarrant County heaves in wet winters and shrinks in baked summers, which slowly tilts hinge posts and throws swing gates out of alignment. New installations need wider, deeper footings than what was standard twenty years ago.
- Aging operators on custom iron gates from the 1995-2005 build era. Original hydraulic and electromechanical units in Southlake’s earliest estate neighborhoods are now failing in clusters. Direct swaps are rarely possible because the gates are custom-fabricated, so each retrofit must be engineered to the specific leaf weight and swing geometry.
- Ice-storm damage to operators and low-voltage wiring. Severe freezes, including the February 2021 event, crack hydraulic cylinders, stress operator gears, and damage buried wiring that feeds keypads and photocells. After each freeze, we see a surge in calls from Southlake homeowners whose gates worked fine in December.
- Entrapment-protection faults on heavy custom leaves. A 14-foot ornamental iron gate carries serious momentum. If the safety photocells are misaligned or the force settings are wrong, the gate either reverses constantly or, worse, does not reverse when it should. We test and adjust these on every install.
Pricing for Gate Installation in Southlake, TX
Southlake gate pricing runs above the metro average because the gates themselves are heavier, wider, and more customized than what you find in nearby cities. A straightforward single swing gate with a basic operator in Southlake typically runs $4,800 to $7,500. A custom double bi-parting swing gate with forged ornamental details, a Viking or Linear operator, and integrated keypad or video entry runs $9,000 to $18,000 installed. Underground operators add $2,500 to $5,000 depending on the leaf weight and access requirements. Every quote is written, itemized, and agreed before any work starts. We do not surprise anyone on the invoice. Call (806) 484-1837 for a free measure and exact pricing.
We Also Serve Cities Near Southlake
Our crews cover the full metro corridor around Southlake, including Colleyville, Grapevine, Bedford, and Keller. If your property sits just outside the Southlake city line, the same technicians and the same written guarantee apply. We schedule by neighborhood, not by city boundary.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Southlake
Southlake’s expansive clay soil heaves and shrinks through wet winters and hot summers, which slowly shifts gate posts and stresses hinges over time. A gate installed with shallow or narrow footings will sag and bind within two to three seasons. We pour wider, deeper footings and plumb posts carefully on every Southlake install, which keeps the gate true for years and minimizes seasonal adjustment. Call (806) 484-1837 for a site evaluation of your soil and gate placement.
Yes. This is one of the most common jobs we do in Southlake’s 76092 ZIP code. Original operators on 1995-2005 estate gates are now failing in clusters, but the gates themselves are custom ornamental work worth keeping. We match a replacement operator to the actual leaf weight and swing geometry of the existing gate, rather than bolting on a generic unit that will fail early. The 90-Day Done Right Promise applies to retrofits the same as new installs. Call (806) 484-1837 and we will measure the gate and quote the retrofit.
Underground operators are an excellent choice for Southlake estates where the homeowner wants the automation invisible and the gate leaves to remain the focal point. They work well on heavy bi-parting swing gates up to roughly 1,100 pounds per leaf. The installation requires a more involved footing excavation because the operator housing sits below grade, and drainage must be planned around Southlake’s clay soil so water does not pool in the box. Expect $2,500 to $5,000 above standard operator cost. Call (806) 484-1837 to discuss whether your driveway geometry supports an underground installation.
Most Southlake driveway gates do not require a loop detector if you use a keypad, remote, or video-intercom system for entry and the gate is set to auto-close on a timer. However, a loop detector is a practical addition for homes where multiple vehicles, delivery trucks, or service vehicles enter daily and you want the gate to hold open automatically when a vehicle is present on the driveway pad. We install both saw-cut and preformed loops and integrate them with any operator brand we service. Call (806) 484-1837 for a recommendation based on your driveway’s traffic pattern.
We install primary and secondary entrapment-protection devices on every automated swing gate in Southlake. That means monitored safety photocells across the gate opening, force-sensing built into the operator, and edge sensors on the leading edges where specified. A 16-foot iron gate carries enough weight to injure a person or a child, so we set force limits conservatively and test the full reversal cycle before we leave. Call (806) 484-1837 if your existing gate lacks current entrapment protection and you want it brought up to standard.
Contact Ironworks Gate Co. for Your Southlake Gate Installation
If you are considering a new driveway gate, a replacement operator, or a full pedestrian-and-vehicle entry system for your Southlake property, call us at (806) 484-1837. We will schedule a free measure, walk the site with you, and give you a written itemized price before any work begins. Victor Salinas and our crew serve Southlake and the surrounding cities with the same standard on every job: done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving homeowners across the Dallas-Fort Worth metro since 1984.