Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Haltom City
Gate motor and opener work in Haltom City falls into two very different jobs: the residential swing gate on a 1960s ranch house off Haltom Road, and the high-cycle slide gate at an auto salvage yard along NE 28th Street that opens fifty times a day for flatbeds and rollbacks. Both live in the same ZIP code, both need to work every morning, and both punish cheap shortcuts. Ironworks Gate Co. has been repairing, replacing, and installing gate automation across Haltom City for over 42 years as a company, and our dispatch runs from the Dallas-Fort Worth office with crews on the ground in Haltom City daily. If your opener is grinding, struggling, or dead, call (806) 484-1837 and a live person will answer, day or night.
Key takeaways:
- We service nine gate-automation brands in Haltom City, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
- Most Haltom City gate motor repairs are completed in one visit, with the price settled before we turn a single bolt.
- Every job is backed by the 90-Day Done Right Promise in writing. If it is not right, we come back and make it right.
- A live person answers the phone 24/7. Not a voicemail, not an answering service.
Why Ironworks Gate Co. Is Haltom City’s Preferred Gate Motor & Opener Company
Haltom City is a working town. Unlike the bedroom suburbs north of Loop 820, this city has a real commercial backbone, and that shapes the gate work we do here every week. The Gate Motor & Opener team at Ironworks has run calls along Denton Highway where a slide gate at a used-car lot failed at 7:00 a.m. with the first truck waiting at the curb. We know the difference between a gate that services a family driveway and a gate that services a business where downtime costs real money, and we dispatch to Haltom City accordingly.
Our technicians are background-checked, uniformed, and trained on nine major opener brands so the correct diagnosis happens on the first visit. We do not farm calls out to a rotating cast of subcontractors. When you book with us, an Ironworks Gate Co. technician shows up in a marked vehicle and treats your property the way they would treat their own mother’s. That is the K.E.Y.S. standard we hold every job to: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first.
Homeowners throughout Haltom City’s 76117 ZIP have trusted us for years, and the reason is simple. We show up when we say we will, we quote the price before the work starts, and we stand behind every repair and installation with a written 90-Day Done Right Promise. No fine print, no arguing, no paperwork shuffle. That is the Keystone Standard on every single gate job.
Our Gate Motor & Opener Services in Haltom City
Motor Replacement in Haltom City
A dead or dying opener in Haltom City usually means one of two things: a residential swing motor that has finally given out after decades on a 1950s or 60s chain-link gate, or a commercial slide motor that got cycled to death by truck traffic. We replace both, and we do it with the replacement motor sized correctly for the gate’s weight, length, and duty cycle. In Haltom City’s older neighborhoods, we often recommend a new operator with more torque than the original because those original posts and hinges have been fighting Tarrant County clay for fifty years. We also handle the full electrical scope, from the operator itself to the safety edges, photo eyes, and keypad wiring.
Motor Repair in Haltom City
Not every grinder needs a new motor. We repair limit switches, replace stripped drive gears, re-time operators, fix bad capacitor starts, and correct control board faults on all nine brands we service. If the repair will not hold up, we will tell you plainly rather than patch it and come back in three months. But plenty of Haltom City gates have years of life left in them with the right repair, and we would rather fix a $40 gear than sell you a $900 operator you do not need. That is how a fourth-generation company keeps customers for forty years.
Linear Motor Installation in Haltom City
Linear gate motors, sometimes called ram or piston operators, are common on Haltom City’s commercial and light-industrial lots where a simple, rugged push-pull action suits a heavy gate. We install and service Linear-brand operators and similar design units on fenced yards, salvage operations, and industrial drives throughout the 76117 area. The key on a linear install is mounting geometry. A linear motor mounted slightly out of plane will tear up rod ends and hinge pins within months. We set them correctly the first time and anchor them to posts set below the active clay zone so Haltom City’s seasonal ground movement does not pull the operator out of line.
Slide Motor Installation in Haltom City
Slide gates are the workhorse of Haltom City’s commercial corridors, especially along NE 28th Street and Denton Highway. Where a swing gate would need fifteen feet of clear arc space that a crowded salvage yard does not have, a slide gate rides on a track parallel to the fence line and covers an opening without ever swinging out. We install slide motors, replace worn rack and pinion gears, and set the track on concrete footings drilled below the shrink-swell clay zone. In Haltom City, that footing depth is not optional. A slide gate track set on a shallow pad will rack out of square within two summers, and the motor will bind and throw error codes until someone resets the whole thing properly.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We are trained and equipped on nine opener brands, including BFT, Linear, Viking, and Ghost Controls, and we keep common service parts stocked on our trucks so a Haltom City repair does not wait on a parts shipment. Whether the gate has a BFT slide operator from the early 2000s or a newer Viking swing unit, we know the board, the limits, the error codes, and the weak points. If you are in Haltom City and you have a brand we do not see every day, call us anyway. Chances are strong we have worked on it, and if the motor is obsolete we can typically retrofit a current operator to the existing gate and posts without tearing out the whole fence.
Common Gate Motor & Opener Problems We See in Haltom City Homes
- Operators binding after summer drought: Tarrant County’s black-clay soil shrinks hard in dry months and swells after rain, heaving gate posts and racking slide tracks out of square. The motor strains, strips gears, or throws error codes, and unless the post is reset below the active clay zone, the problem returns every year. We drill footings to the depth that stops this cycle.
- Burned-out motors on commercial slide gates: Auto salvage yards and used-car lots along NE 28th Street cycle their slide gates dozens of times daily with heavy truck traffic. What would be a ten-year residential motor lifespan becomes a two or three year commercial replacement cycle. Haltom City has this failure mode at a clip the northern suburbs simply do not see.
- Corroded hinge posts on 1950s and 60s swing gates: Original chain-link gates from Haltom City’s post-war tract housing era are still common, and their galvanized posts and latch hardware are well past service life. Replacing just the motor on these installations leads to sag correction calls every few months until the post is replaced and set properly.
- No entrapment protection on older commercial operators: Many Haltom City commercial gates predate current safety requirements and lack proper photo eyes, contact edges, or loop detectors. We install current entrapment protection on every commercial job, keeping the site compliant and keeping vehicles and people safe.
Pricing for Gate Motor & Opener in Haltom City, TX
Gate motor and opener work in Haltom City typically runs in predictable ranges. A common residential swing gate operator replacement in the 76117 area runs $750 to $1,400 installed, depending on operator size, brand, and whether the existing posts are sound. A slide motor replacement on a commercial gate along Denton Highway or NE 28th Street runs $1,600 to $4,200, with the higher end covering heavier-duty operators, loop detector installation, and track realignment. Motor repairs in Haltom City most often land between $185 and $475. A new full slide gate install with operator, track, safety equipment, and concrete footings below the clay line typically runs $4,500 to $9,000. Every price is quoted and agreed in writing before any work starts. We also keep standing offers in place for Haltom City customers: $50 off any repair over $250, a free second opinion on any written estimate, and an $89 seasonal tune-up. Seniors and veterans always receive a 5% discount. Call (806) 484-1837 for a free estimate.
We Also Serve Cities Near Haltom City
Beyond Haltom City, our technicians work regularly in North Richland Hills, Hurst, Keller, and Bedford. If you live in any of these surrounding cities and need gate motor repair or installation, the same team, the same pricing, and the same 90-Day Done Right Promise apply. Visit our Haltom City page for more on how we serve this specific market, or call (806) 484-1837 to speak with a live person right now.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Haltom City
Because the gate is opened and closed dozens of times daily by heavy trucks, not four times daily by a family sedan. The high-cycle loading on Haltom City’s commercial slide gates, especially along NE 28th Street and Denton Highway, wears out motors, rack and pinion gears, and track rollers at three to five times the rate of a residential install in Watauga or Richland Hills. A residential motor that would last a decade gets two or three years on a busy salvage yard entrance. We size commercial replacement operators for that duty cycle and install loop detectors so trucks can exit hands-free without over-cycling the motor from the keypad. Call (806) 484-1837 and we will assess your specific gate’s cycle rate and recommend an operator built for it.
No. The motor is not the cause, and replacing it without fixing the post will leave you with a new motor fighting the same heaving clay. Haltom City’s expansive black-clay soil shrinks during summer droughts and swells after rains, which tilts gate posts and racks the frame out of square. The motor then strains against a gate it can no longer move cleanly. The correct fix is to reset the posts in concrete footings drilled below the active clay zone, realign the gate, and only then address the motor if it has been damaged from fighting the bind. We do this work in Haltom City regularly and we do it once. Call (806) 484-1837 for an on-site assessment.
Yes. Shared driveways and rights of way are common in Haltom City’s older 1950s and 60s neighborhoods, and they require planning that a solitary driveway does not. We sequence the work so the gate can be manually operated during installation, and we schedule any electrical run so it does not close off the agreement’s access path. On a shared driveway off NE 28th Street, our team replaced a failed FAAC slide motor on a salvage yard’s high-cycle gate and kept the adjacent pedestrian swing gate operating independently throughout the job. We will lay out the plan before we start so both properties know exactly when and how the work happens. Call (806) 484-1837.
Commercial gate operators in Haltom City must meet current UL 325 and ASTM F2200 entrapment protection requirements, which include monitored photo eyes or contact safety edges, appropriate warning signage, and secondary entrapment protection devices depending on the operator class and installation. Many older salvage yard operators were installed before these standards existed and lack the required protection entirely. We bring non-compliant Haltom City commercial gates up to current standard as part of every motor replacement or repair, and we document the protection devices installed. The short answer: photo eyes, edges, or loops that stop and reverse the gate on contact are mandatory, and we handle that compliance work on every commercial job.
Sometimes, and we will tell you honestly which way the math goes. If the operator is repairable with available parts and the gate itself is sound, we will repair it and stand behind the work with the 90-Day Done Right Promise. But many obsolete operators on Haltom City’s 1950s through 70s chain-link gates have parts that have not been manufactured in years, and the original hinged posts are often corroded beyond their service life. In that case, retrofitting a current operator from BFT, Linear, Viking, Ghost Controls, or another brand we service is usually cheaper over five years than chasing scarce parts on a motor that will fail again. We will show you the options, give you a written price, and you decide before any work begins. Call (806) 484-1837 for a free estimate.
Call Ironworks Gate Co. for Gate Motor & Opener Work in Haltom City
If your gate motor is grinding, binding, or dead in Haltom City, call (806) 484-1837. A live person answers 24 hours a day, 7 days a week. We will send a background-checked, uniformed technician to your Haltom City property, quote the price before any work starts, and back the completed job with our written 90-Day Done Right Promise. Whether it is a residential swing gate off Haltom Road or a slide gate at a salvage yard on NE 28th Street, the job gets done right, done once, and guaranteed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haltom City for over 42 years.