Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Parts & Welding for Euless Homeowners
Gate parts and welding in Euless typically runs $180 to $1,400 depending on the job. A hinge replacement or weld repair usually costs between $180 and $450, while a full post replacement or custom fabrication falls on the higher end of that range. Most repairs are completed in a single visit, and we answer the phone around the clock at (806) 484-1837.
We are Ironworks Gate Co., and we have been welding and repairing driveway gates since 1984. Victor Salinas leads a team that has seen just about every failure a Texas gate can throw at you: rusted hinges in Bear Creek, sagging posts after a North Texas clay shift, cracked welds on a double swing gate off Fuller-Wiser Road. We do the work right, and we put that in writing with our 90-Day Done Right Promise. If it is not right, we come back and make it right. No paperwork, no arguing, no exceptions.
We understand what a gate means to a homeowner in Euless. It is the first thing you see when you pull in and the last thing between your home and the street. When a hinge fails or a weld cracks, it is not something to put off. Call us and a live person answers, 24 hours a day, 7 days a week. Not a voicemail tree. Not an answering service.
What Our Gate Parts & Welding Service Includes
Hinge Replacement
Hinges carry the entire weight of your gate, and when they wear out, the gate starts to sag, scrape, or bind. In Euless, where summer heat bakes steel and spring storms bring rain, hinges take a beating year after year. We replace worn hinge pins, weld on new leaf hinges, and realign the gate so it swings like it did when it was first hung.
Post Replacement
A gate post is only as good as what holds it in the ground, and North Texas clay expands and contracts enough to loosen even a properly set post over time. We remove the old post, set a new one in concrete, and weld the hinge assembly back in place. The job is not finished until the gate opens and closes without dragging or rubbing.
Rail Repair
The horizontal rails on a gate frame do the heavy lifting, and when one bends or rusts through, the whole gate loses its structure. We straighten bent rails where possible and cut out and replace sections that are too far gone. Our welders match the existing metal so the repair blends instead of looking like a patch job.
Custom Welding
Some repairs need a manufactured part. Others need a piece of steel cut, shaped, and welded to fit a gate that was built twenty years before the manufacturer went out of business. We do custom welding in our shop and on-site, fabricating brackets, reinforcing frames, and building replacement sections that match the original design. If it is steel, we can weld it.
Gate Rollers
Slide gates in Euless ride on rollers, and when a roller seizes, the gate grinds and jerks instead of sliding smoothly. We replace worn rollers, service the track, and adjust the gate so the motor is not fighting a losing battle. A slide gate with fresh rollers runs quieter and puts less strain on the opener.
Latch & Lock
A gate latch that does not catch is a gate that does not lock, and a gate that does not lock is an open invitation. We replace broken latches, adjust strike plates, and install locks that work with your existing brand of opener or keypad. The gate should close, catch, and stay closed until you tell it otherwise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Parts & Welding
We work on BFT openers regularly across Euless and the surrounding area. BFT is a solid Italian brand, but their hinges and slide hardware wear like anything else under Texas sun and rain. We stock BFT replacement parts and know how their slide gates should be aligned so the opener is not working against the track.
Linear and Viking are two brands we see often on older estate gates in neighborhoods like Wilshire and Thornbridge. Linear’s swing gate arms are dependable, but the mounting brackets and hinge hardware can crack after years of wind load. Viking gate operators are heavy-duty, and they need heavy-duty posts and welds to match. We have serviced Ghost Controls units as well, which are popular with homeowners who installed a DIY opener and later need a professional to make the gate itself sound.
Whether you have BFT, Linear, Viking, Ghost Controls, or any other make, we can help. The gate itself, the hinges, the posts, the welds: that is our specialty. The brand of opener on top of it does not matter. If it needs steel cut and welded, we are the ones to call.
Signs You Need Gate Parts & Welding Right Now
- The gate scrapes or drags on the ground. This usually means a hinge has worn out or a post has shifted. Every open and close grinds away more metal, and the problem gets more expensive by the week. A realignment or hinge replacement now is cheaper than a full frame rebuild later.
- You can see cracks in the weld joints. A cracked weld is a gate frame that is slowly coming apart. The steel is still there, but the connection is failing, and Texas wind will keep working on that crack until the weld fails completely. Welding it now is a small job. Replacing a twisted gate later is not.
- The gate sags and will not close all the way. Sagging is almost always a hinge or post problem. The longer it sags, the more the latch and frame take damage. A hinge replacement restores the gate to level and takes the strain off the opener.
- The gate jerks or shudders when it moves. On a slide gate, this typically points to a seized roller or a bent rail. On a swing gate, it is often a hinge binding. Either way, the motor is fighting extra resistance, which shortens its life and burns electricity.
- The latch will not catch without lifting the gate. If you have to lift, shove, or jiggle the gate to get it to latch, something structural has moved. It may be a loose hinge bolt or a shifted post, but it will not fix itself. A gate that does not latch securely is a security gap, full stop.
Our Gate Parts & Welding Process - Step by Step
- 1
You call, a person answers. Day or night, you get a live voice on the phone. We ask what the gate is doing, what kind of gate it is, and what the opener is if you know it. We give you a straight answer about whether we can help and when we can be there.
- 2
We inspect the gate on site. Our technician walks the gate, checks the hinges, posts, welds, rollers, and latch. We use a level, a tape, and a straight edge to find exactly where the gate is out of square. The inspection is thorough, and you are welcome to stand there and watch.
- 3
We quote the price before work starts. No surprises. We tell you what needs to be done, what it will cost, and how long it will take. The price is agreed to before a single bolt is turned. If you have a written estimate from someone else, our free second opinion applies, and we will tell you honestly if their price is fair.
- 4
We do the work in one visit. Most hinge replacements, weld repairs, and roller jobs are done the same day. We carry the parts and tools to handle the common failures without a second trip. Uniformed, background-checked technicians do the work, and they treat your property the way they would treat their own mother’s.
- 5
We stand behind it in writing. Every job carries our 90-Day Done Right Promise. If something is not right, call us and we come back. That is the Keystone Standard, and it has been applied to every gate job we have done since 1984.
How Much Does Gate Parts & Welding Cost in Euless?
Best Gate Parts & Welding in Euless, TX costs depend on what failed and how far gone it is. A single hinge replacement typically runs $180 to $320. A weld repair on a cracked frame section is usually $200 to $400, depending on the length of the crack and whether we need to add reinforcement plate. Post replacement runs $500 to $900 per post, which includes concrete and setting. Custom fabrication work, like building a replacement gate section or a custom bracket, generally starts around $400 and goes up based on the steel and shop time involved. Roller replacement on a slide gate is commonly $250 to $450, and latch and lock work falls between $150 and $350.
The biggest factors that move the price are the size of the gate, the condition of the existing steel, and whether the post has shifted in the ground or simply needs new concrete. A gate that has been scraping for a year will take more labor to align than one caught early. The way to avoid overpaying is to get the problem looked at before it gets worse, and to call someone who actually welds rather than a handyman who will bolt on a temporary fix. Our estimates are free, the price is settled before work starts, and you will never see a surprise line item on the invoice. Call (806) 484-1837 for an exact quote.
Gate Parts & Welding Near Euless - Our Service Area
We serve home gate customers throughout the Mid-Cities and Northeast Tarrant County. If you live in Euless, Hurst, Bedford, North Richland Hills, Colleyville, Grapevine, Southlake, Richland Hills, Coppell, or Keller, we are close by. Most of our Gate Parts & Welding in Euless calls are answered the same day, and for customers in Gate Parts & Welding in Bedford or Gate Parts & Welding in Irving, we schedule within a day or two in most cases. A live person is always on the line to give you a straight answer about timing.
Serving Euless, TX - Our Local Coverage Area
We’re based in the Euless area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Parts & Welding in Euless
Bedford Gate Parts & Welding covers the same structural and mechanical components of a driveway gate: hinges, posts, rails, rollers, latches, and the welds that hold the frame together. It is the work that keeps the gate square, level, and secure, regardless of what brand of opener is attached to it. At Ironworks Gate Co., we handle everything from a single hinge pin to a full custom fabrication job.
Most hinge replacements, weld repairs, and roller replacements are finished in a single visit, usually within one to three hours on site. Post replacement takes longer because the concrete needs to set before the gate is rehung, which can mean a follow-up the next day. We will tell you the timeline before we start, and we will be there when we say.
Costs in Euless typically range from $180 for a simple hinge replacement to $1,400 or more for a full post replacement with custom welding. The exact price depends on the size of the gate, the condition of the steel, and how long the problem has been allowed to get worse. We give a written quote before work begins, so you know the number before we pick up a tool. Call (806) 484-1837 for a free estimate.
Yes. We have serviced all four brands across Euless and the surrounding area, and we understand the specific hardware and weld points each one depends on. The brand of opener does not change how we repair the gate structure itself, but it helps us align everything so the opener works without fighting the gate. Whatever brand is on your driveway, we can help.
In most Euless cases, yes. We keep same-day availability for Emergency Gate Parts & Welding in Euless, TX, and a live person answers the phone 24 hours a day, 7 days a week to get your repair scheduled. If a gate is stuck open, stuck shut, or has a failed weld that makes it unsafe, call and we will get someone out as quickly as possible.
Every job we complete is covered by our 90-Day Done Right Promise. That is a written guarantee: if it is not right, we come back and make it right, no paperwork and no arguing. It is the same standard we have applied to every gate job since 1984, and it applies to parts, welding, and labor alike.
Clear enough space on either side of the gate for us to work, and make sure the gate is accessible from both the driveway and the street side if possible. If you have a slide gate, clear any debris from the track. There is no need to disconnect the opener or do anything to the gate itself; we will handle all of that when we arrive.
Schedule Your Gate Parts & Welding Service in Euless Today
When your gate sags, scrapes, or will not catch, do not wait for the damage to spread. Call Ironworks Gate Co. at (806) 484-1837 for a free, no-obligation estimate. A live person answers 24 hours a day, 7 days a week, and we will give you a straight answer on price and timing. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Euless since 1984.