Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Bedford
Gate parts and welding in Bedford usually means one of two things: a sagging cedar privacy gate that won’t close, or a post that’s given up after forty years in North Texas clay. Most Bedford homeowners need a hinge replacement, post reset, rail repair, or a custom weld done right the first time. We’re Ironworks Gate Co., and our Gate Parts & Welding team handles all of it. If your gate is dragging, binding, or pulling away from the post, call us at (806) 484-1837. We’ll send a welder who knows Bedford’s houses and soil, not a trainee with a van full of guesses.
Why Ironworks Gate Co. Is Bedford’s Preferred Gate Parts & Welding Company
Bedford is our kind of town: fully built out, heavily treed, full of ranch-style and split-level homes where the original cedar gates are now 30 to 50 years old. When a whole subdivision of gates starts failing at the same time, it’s rarely a coincidence. It’s the black clay heaving posts and decades of Texas sun drying out untreated cedar. We’ve seen it on Shady Lane in Rustic Woods, along the streets around Central Park, and through the neighborhoods off Harwood Road and Bedford Road. Homeowners here tend to have lived in the same house for twenty years or more. They remember the last contractor who said “that’ll hold” and didn’t. Our crews are background-checked and uniformed, led by Victor Salinas, and we show up when we say we will. Every job comes with our written 90-Day Done Right Promise. If it’s not right, we come back and make it right. No paperwork, no argument.
Bedford customers call us because a live person answers the phone at (806) 484-1837, 24 hours a day, 7 days a week. No voicemail tree. No “we’ll get back to you Monday.” The dispatch and scheduling desk sits in our Dallas-Fort Worth office, and crews serve Bedford locally, so your call gets routed fast.
Our Gate Parts & Welding Services in Bedford
Hinge Replacement
Most Bedford gate failures start at the hinge. The original builders used lightweight strap hinges screwed into 4×4 cedar posts. Forty years of clay-soil movement works those screws loose until the hinge pins bend and the gate sags. We replace the hinges with heavy-duty weldable hangers that anchor into solid wood or steel, not just surface screws. On a Bedford ranch-style gate, that usually means the difference between a gate that shuts clean and one that drags on the concrete for years.
Post Replacement
This is the dominant repair in Bedford, and it’s tied directly to how the original houses were built. Posts from the 1975-1995 tract era were often set directly into expansive black clay with little or no concrete footing. Wet springs swell the clay; July heat over 100°F bakes it into contraction cracks. The post heaves, tilts, and eventually rots below grade. We dig the old post out, set a new one with a proper concrete collar or steel post footing, and weld the bracket so it won’t walk. In fact, last spring our crew was called to a split-level on Shady Lane in the Rustic Woods subdivision where a 16-foot swing gate had sagged so badly it dragged across the driveway. The hinge post had rotted below grade where the 4×4 sat directly in black clay with no concrete footing, so we dug out the old post, set a new steel post footing, welded on a heavy-duty hinge post bracket, and rehung the gate with new LiftMaster hinges, restoring full swing clearance without replacing the cedar panel.
Rail Repair
Cedar rails split. That’s just what they do when the gate is heavy and the post is leaning. We see this most often on double swing gates along Harwood Road and Bedford Road, where the weight of two full cedar panels rests on a single center rail. When that rail splits at the hinge line, the whole gate hangs low on one side. We straighten the frame, sister in a new rail or weld a steel stiffener, and rehang it so the pressure is off the hinge.
Custom Welding
Not every Bedford gate needs a replacement part. Some need a fix that doesn’t exist on a shelf. We weld steel gate frames, fabricate replacement brackets, build custom hinge plate assemblies, and repair broken steel frames on driveway gates. Whether it’s a 1970s wood privacy gate or a modern steel estate gate, we can weld it square and strong. We’ll also weld in a new steel post sleeve over an existing post that’s still solid below grade but cracked above.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We work on gate hardware and automation from nine major brands, including BFT, Linear, and Ghost Controls. When a Bedford gate needs a part, we know which brand it takes and we stock the common items locally. That means less waiting on a parts truck from Dallas and fewer return trips. If your opener was installed by a builder in 2008 or by a handyman last year, we can match the part, or we’ll weld in an adapter plate that makes a modern hinge or actuator fit the old mount. Most jobs are completed in a single visit, with pricing settled before a single bolt is turned.
Common Gate Parts & Welding Problems We See in Bedford Homes
- Clay heave and post tilt. Bedford’s expansive black clay swells in wet springs and contracts in summer droughts, tilting posts until swing gates bind shut or scrape the driveway. The fix is a post reset, not a bigger hammer.
- Rotted 4×4 posts below grade. Original cedar posts from the 1975-1995 housing era were often set directly into clay without adequate concrete. They rot invisibly at ground level, then fail suddenly. We see it in wave after wave across the same subdivisions.
- HOA approval traps. Many established Bedford subdivisions have deed restrictions covering fence stains, materials, and gate styles. A simple board or hinge swap can trigger an HOA approval process before any work starts. We know which neighborhoods require it and we’ll tell you straight.
- UV-dried cedar boards. Summer heat over 100°F and intense UV dries untreated cedar gate boards faster than in more humid climates to the east. Boards splinter, rails split, and fasteners lose their bite. We can replace just the failed boards, or rebuild the gate panel if the frame is still true.
Pricing for Gate Parts & Welding in Bedford, TX
You should know what to expect before you call. In Bedford, a hinge replacement on a standard 6-foot cedar privacy gate typically runs $180 to $340, including the heavier hardware and adjustment. A rotted post replacement with new concrete footing and rehang runs $420 to $680 per post, depending on how deep the old footing goes and whether we’re setting steel or wood. Rail repair averages $150 to $300. Custom welding starts around $95 for a simple bracket and runs $250 to $600 for a full steel frame repair or post sleeve. The price is quoted and agreed before any work starts, so the invoice won’t surprise you. We also offer $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (806) 484-1837 for a free estimate.
We Also Serve Cities Near Bedford
If you’re just outside city limits, we serve Bedford and the surrounding Mid-Cities communities of Colleyville, Euless, Hurst, and North Richland Hills. The same crews, the same written guarantee, the same live answer when you call. If your gate is on a county parcel out past the city line, we handle that too. One call covers it: (806) 484-1837.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Bedford
Bedford sits on expansive black clay that swells in wet springs and contracts in summer drought. Every seasonal cycle works the post a little further out of plumb, and that movement loosens hinge screws until they strip out of the cedar. The permanent fix is a post reset with proper concrete, plus heavier hinge hardware anchored through the post, not just into it. Call (806) 484-1837 and we’ll tell you if a reset will solve it before we ever touch the gate.
Yes. If the cedar panel and frame are still sound, we can remove the rotted wood post, set a new steel post or steel post sleeve in concrete, weld the hinge brackets to it, and rehang the original gate on new hinges. It’s a common fix in Bedford’s 1970s and 1980s neighborhoods, where the gate panels often outlast their posts. The price is agreed before we start, and the 90-Day Done Right Promise covers the work.
In many of Bedford’s established subdivisions, yes. Deed restrictions in several HOAs specify approved fence stains, materials, and gate styles, and even a hinge or latch swap can require pre-approval. We’ll help you identify whether your neighborhood requires it and what paperwork to file. We won’t start a job that puts you in violation of your HOA.
Often it is, though the root cause is usually a post or track shifted by Bedford’s contracting clay. When the ground dries out in July and August, the post moves, the track misaligns, and the roller or chain grinds against the rail or housing. We fix the post or weld in a new roller bracket, then re-lubricate the works. If the roller itself is done, we replace it on the same visit. Call (806) 484-1837 and we’ll diagnose it over the phone before we schedule.
Yes. We weld the operator mounting plate, hang the solar panel where it gets full Texas sun, and wire the battery and control board. We service and install operators from BFT, Linear, and Ghost Controls, among others. If you have acreage with no mains power, a solar opener is usually the right call. Estimates are free, and the price is settled before we start the work.
Contact Ironworks Gate Co. in Bedford Today
If your gate is dragging, tilting, or pulling loose from the post, don’t wait for the next rain or the next 100-degree day. The clay under Bedford doesn’t stop moving, and a gate that’s binding now will only get worse. Call Ironworks Gate Co. at (806) 484-1837 for a free estimate. A live person answers, day or night. We’ll schedule a crew to your Bedford home, quote the work up front, and stand behind it with our written 90-Day Done Right Promise. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford and the surrounding Mid-Cities.