Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Bedford
Gate installation in Bedford usually starts with one question: does your HOA need to approve it first? In most Bedford subdivisions the answer is yes, and we handle that approval process as part of the job. A new driveway gate in Bedford typically runs $2,800 to $9,500 installed, depending on material, width, and whether we’re adding automation. Call (806) 484-1837 and we’ll walk the site with you, check the deed restrictions, and give you a written price before any work starts.
We’ve worked the Mid-Cities long enough to know Bedford’s gates better than the original builders did. These are 1970s to 1990s ranch and split-level homes, nearly all with cedar privacy fence gates original to construction. The posts are 4×4 cedar set directly in black clay, which means forty years of seasonal heaving has done its work. If your gate binds shut every August and drags every March, the post is the problem, not the hinge. We set new posts in concrete collars below the frost line and the gate stops moving.
Why Ironworks Gate Co. Is Bedford’s Preferred Gate Installation Company
Victor Salinas founded Ironworks Gate Co. in 1984, and the company has spent over 42 years learning one trade: gates. Not fences, not landscaping, not general contracting. Driveway gates, pedestrian gates, swing gates, sliding gates, and the automation that runs them. That narrow focus means our crews have seen every gate failure Bedford’s soil and sun can produce, and they know which fix lasts and which one gets called back in six months.
Bedford homeowners call us because their neighbors did. We’ve completed a lot of work in the established interior subdivisions – the Shady Brook area off Harwood Road, the streets around Central Drive, the neighborhoods feeding into Cheek-Sparger Road – and word travels block by block when a crew shows up on time, sets posts in concrete, and leaves the gate square and true. Our technicians are background-checked and uniformed. They work in your driveway the way they’d work in their own mother’s. And every job, every time, carries the 90-Day Done Right Promise in writing. If it isn’t right, we come back and make it right. No paperwork, no arguing.
A live person answers our phone 24 hours a day, 7 days a week. You call, a person picks up. Not a voicemail tree, not a callback queue. If your gate is stuck open at 9 p.m. and your dog is making a break for Harwood Road, we answer and we send someone.
Our Gate Installation Services in Bedford
We install every type of residential gate you’ll find in Bedford, and we tailor each one to the lot, the HOA rules, and the soil it’s going into. Here’s what we handle most often in this city.
Swing Gate
The most common gate in Bedford, because it fits the classic ranch-house layout: a simple single or double leaf swinging on hinges, built into the cedar privacy fence line. A new swing gate in Bedford runs $1,400 to $4,200 depending on width, material, and whether we’re automating it. The critical detail here is the post. We set new hinge posts in 24-inch-deep concrete footings with a concrete collar, because Bedford’s clay will heave a shallow post within two seasons. We install swing gates that close flush in March and still close flush in August.
Double Gate
Driveway-width double gates are where Bedford’s soil causes the most grief. Two leaves meeting in the middle means twice the post load and half the tolerance for heaving. We install double swing gates from $2,900 to $7,500, and we pay particular attention to the center drop rod and the header clearance so the gate doesn’t bind when the ground swells after a wet spring. Many Bedford double gates were original cedar on original 4×4 posts, and by now both leaves have sagged into each other. We replace the whole assembly: posts, leaves, hinges, and hardware, sized for the opening and set for the clay underneath.
Pedestrian Gate
The gate you actually use every day. A pedestrian gate in Bedford runs $900 to $2,800 installed, including new posts if needed. These small gates fail fast when they’re original to the house, because the 4×4 posts rot at the soil line and the gate starts leaning into the latch. We build pedestrian gates with pressure-treated posts or steel-reinforced posts, and we match the fence stain to keep the HOA happy. A quiet, solid pedestrian gate that latches with one hand is a small thing that changes how a house feels.
Sliding Gate
Sliding gates make sense on Bedford corner lots and longer driveways where a swing leaf would eat half the parking pad. A residential sliding gate in Bedford typically runs $4,500 to $11,000 installed, including the track or cantilever system and the operator. We handle the full job: steel or wood gate panel, roller tracks, safety edges, and the opener. If your lot slopes toward the street, a cantilever system will serve you better than a track, because clay heave will bind a ground-track gate within a couple of years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Bedford
We install and service automation from BFT, Linear, and Ghost Controls, three brands we see frequently on Bedford driveways. BFT operators hold up well on heavy double swing gates, Linear keypads are common in gated Bedford HOA entries, and Ghost Controls has become the default choice for homeowners who want a quiet solar-capable opener without trenching power across the yard. Whatever brand is on your existing gate, our technicians are trained to work on it. We stock common boards, arms and keypad parts locally, so a Bedford service call usually means one visit, not a two-week parts wait.
Common Gate Installation Problems We See in Bedford Homes
- Posts heaving in black clay. Bedford’s expansive clay swells in wet springs and contracts hard during July and August, when highs routinely pass 100°F. Original 4×4 cedar posts set directly in soil, without concrete, tilt and bind gates season after season. We excavate the old post, set a new one in a concrete collar below the frost line, and the gate finally stays where it’s put.
- West-facing cedar boards splintering under UV. Bedford’s summer sun is brutal on untreated cedar, especially on gates that face west and catch the full afternoon heat. Boards dry, split, and pull away from the frame. We replace with properly sealed or stained cedar and match the existing fence so the repair disappears.
- HOA approval delays stalling a simple job. Many Bedford subdivisions have deed restrictions that specify approved stain colors, gate materials, and even hardware finishes. A homeowner who swaps a rotten gate board without checking the HOA rules can end up with a violation letter and a stop on the work. We check the restrictions before we start, submit the paperwork when needed, and coordinate with the management company so the job doesn’t stall.
- Undersized operators on double gates. A cheap opener rated for a single gate gets bolted to a double swing gate and dies within a year or two. Bedford’s winds and heat punish undersized motors. We match the operator to the gate’s actual weight, wind load, and duty cycle, so the motor isn’t the part that fails first.
Pricing for Gate Installation in Bedford, TX
Here are the ranges we quote most often in Bedford, stated plainly so you can budget before you call:
- Pedestrian gate: $900 to $2,800
- Single swing gate (manual): $1,400 to $4,200
- Double swing gate (manual): $2,900 to $7,500
- Sliding gate with operator: $4,500 to $11,000
- Gate operator installation (existing gate): $1,200 to $3,400
What moves the price in Bedford is post depth. A gate on a corner lot with deep clay sometimes needs a 30-inch footing instead of a 24-inch one. HOA-required materials, like a specific stain or a steel frame behind cedar, also affect cost. The quote we give you is the price you pay, settled before we turn the first bolt. No surprises on the bill. And every installation carries the 90-Day Done Right Promise in writing.
We recently installed a double swing gate in the Shady Brook subdivision off Harwood Road. The HOA required a specific cedar stain and 4×4 post footings set below the frost line with concrete collars, so we coordinated with the management company for approval, then set new hinge posts in 24-inch-deep footings to stop the heaving that had made the old gate bind every summer. That’s the Bedford job in miniature: approval first, then footings deep enough to beat the clay.
We also offer standing discounts for Bedford homeowners: $50 off any repair over $250, a free second opinion on any written estimate, an $89 seasonal tune-up, and a permanent 5% senior and veteran discount. Call (806) 484-1837 for a free estimate.
We Also Serve Cities Near Bedford
Our crews work throughout the Mid-Cities, so if you live just over the city line, we’re already close. We serve Gate Installation in Bedford daily and regularly run jobs in Colleyville, Euless, Hurst, and North Richland Hills. Dispatch is coordinated from our Dallas-Fort Worth office, with crews scheduled locally so travel time doesn’t eat your afternoon. If you’re in one of these neighboring cities, the same pricing, the same written guarantee, and the same Gate Installation team apply.
Serving Bedford, TX - Our Local Coverage Area
We’re based in the Bedford area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Gate Installation in Bedford
In most Bedford subdivisions, yes. Deed restrictions in many established neighborhoods specify approved stain colors, gate materials, hardware finishes, and even gate height. Before we install anything, we check the restrictions for your specific subdivision and, when required, submit the architectural request to your HOA or management company on your behalf. We’ve done enough Bedford jobs to know which neighborhoods require paperwork and which just need the right stain. Call (806) 484-1837 and we’ll figure out where your subdivision stands before any work begins.
Because adjusting hinges on a gate with a heaving post doesn’t fix the post. Bedford sits on expansive black clay that swells when it’s wet and contracts hard during summer drought. A 4×4 post set directly in that soil, without a concrete footing, will tilt with every seasonal cycle. The fix is to pull the post, dig the footing deep enough to get below the active heave zone, and set a new post in concrete with a collar. We do this daily across Bedford, and once it’s done, the gate stays square. Call (806) 484-1837 for a free assessment.
Yes, and corner lots are exactly where sliding gates earn their keep. If your driveway is short and a swing leaf would block the sidewalk or your own parking pad, a sliding gate runs along the fence line instead of arcing into the yard. We install both ground-track and cantilever sliding gates in Bedford, and on clay soil we generally recommend cantilever because it doesn’t rely on a track that the heaving ground can bind. A typical Bedford sliding gate with an operator runs $4,500 to $11,000. Call (806) 484-1837 and we’ll measure your lot and show you what fits.
For a double swing gate in Bedford, our crews most often recommend a linear-arm operator sized for the gate’s actual weight and wind load, not a minimum-spec unit. Heavy double gates in Bedford heat and wind need a motor with enough headroom that it isn’t running at full output on a 100°F afternoon. BFT and LiftMaster both make linear arms that handle Bedford conditions well, and we stock parts for both locally. The right pairing is the operator the gate needs, not the cheapest one on the shelf. Call (806) 484-1837 and we’ll spec it properly for your gate.
The keypad isn’t the part that moves, so the answer is to mount it on a post or pedestal that isn’t attached to the moving gate, then run wiring with enough slack and proper conduit to handle seasonal ground movement. We install keypads on a fixed bollard or fence post separate from the gate leaf, which means the wiring never flexes with gate travel, and we set the pedestal in a concrete footing so it doesn’t heave with the clay. It’s a small design choice that keeps the keypad working through Bedford’s wet springs and hot summers. Call (806) 484-1837 to talk through your entry setup.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Bedford since 1984.