Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Southlake
Gate repair in Southlake most often comes down to one thing: a custom ornamental gate that no longer closes the way it should. You’ll pay somewhere between $185 and $2,800 depending on whether we’re realigning hinge posts that shifted in the clay soil or retrofitting a 20-year-old Viking operator onto a 16-foot iron leaf. We’ve worked on hundreds of Southlake gates since 1984, and we know the difference between a quick adjustment and a structural fix. If your gate is sagging, dragging, or refusing to open, call us at (806) 484-1837. A live person answers, day or night.
Why Ironworks Gate Co. Is Southlake’s Preferred Gate Repair Company
Southlake isn’t a market where a handyman with a crescent wrench can make things right. The gates out here are heavy. Custom-fabricated. Built into stone columns. Wired into intercoms and camera systems that were top-of-the-line when the house went up in 2001 and haven’t been touched since. We train our technicians on nine gate-automation brands, including Viking, BFT, and Linear, because that’s what Southlake driveways actually have.
Victor Salinas, who runs our shop, has been rebuilding gates long enough to know that an operator swap on a Carillon estate gate isn’t the same as one on a starter home in Keller. The leaf weighs more, the geometry is tighter, and the homeowner expects it to run silent for another twenty years. Our crews live that standard. We show up when we say we will, in uniform, background-checked, and we stand behind every repair with our written 90-Day Done Right Promise. No paperwork, no arguing. If it’s not right, we come back and make it right.
Our Gate Repair Services in Southlake
Electric Gate Repair
Electric gate repair in Southlake usually means an operator that’s lost its mind, a keypad that won’t respond, or wiring that gave out after a freeze-thaw cycle. We troubleshoot the whole system, not just the symptom. That means checking the operator board, the photo eyes, the loop detector, and the power supply. If the problem is a Viking or BFT board that’s finally given up after 15 years of Texas heat, we’ll tell you straight: repair or replace, with the price quoted before we touch a screwdriver.
Automatic Gate Repair
An automatic gate that won’t open when it’s raining is not a convenience problem. It’s a you-can’t-get-to-work problem. We carry parts for Viking, BFT, Ghost Controls, and the other major brands on our trucks, so most automatic gate repairs in Southlake are done in a single visit. That matters when the gate is 14 feet wide and blocking your only exit.
Hinge & Post Repair
Southlake sits on expansive black clay that swells after spring rains and contracts through August. That movement pushes gate posts out of plumb by a quarter inch some years, half an inch others. Over time, the hinges take the stress and the leaf starts to sag. We re-plumb the posts, rebuild the hinge brackets, and reinforce the footing where it’s needed. This isn’t a cosmetic fix. It’s the difference between a gate that swings true and one that drags across the driveway every June.
Gate Realignment
Realignment is the most common repair we perform on Southlake’s bi-parting driveway gates. When one leaf closes a half-inch low, the center stop misses, the lock won’t engage, and the whole assembly groans every time it cycles. We adjust the swing arms, shim the hinges, and dial in the operator limits so both leaves meet dead-center without binding. Most realignments take under two hours.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southlake
We’re certified to work on nine gate-automation brands, and in Southlake we see a lot of Viking, BFT, and Ghost Controls units on custom estate gates. We stock the most common replacement boards, arms, and photo eyes for these brands locally, which means fewer “part’s on order” conversations and more single-visit repairs. If your operator is so old the manufacturer no longer supports it, we’ll retrofit a current model to match your existing gate’s weight and swing geometry. The iron stays. The brain gets upgraded.
Common Gate Repair Problems We See in Southlake Homes
After 42 years of working gates, we can almost predict what’s wrong before we pull into the driveway. In Southlake specifically, these four issues account for most of our calls:
- Hinge posts shifting seasonally. The black clay under Tarrant County heaves with moisture and shrinks in the heat. Posts that were plumb in 1998 are now leaning just enough to throw the gate off its swing. We fix the alignment and reinforce the footing so it holds.
- Original operators failing in clusters. Southlake’s earliest estate neighborhoods, built between 1995 and 2005, are hitting the 20-year mark on their original operators. Hydraulic and electromechanical units from that era are dying on the same streets within months of each other. Because the gates are custom ironwork, each replacement has to be retrofitted to the existing leaf weight, not swapped for whatever is on the shelf.
- Ice storm damage to boards and wiring. The February 2021 freeze killed operators all over Southlake. Low-voltage wiring cracked, circuit boards shorted, hydraulic cylinders seized. After every freeze event, we see a surge of calls from homes whose gates worked fine until the temperature dropped. We trace the damage, replace what failed, and weatherproof the replacement.
- Photo eyes knocked out of alignment. A safety photocell that’s been bumped by a mower, a delivery truck, or a kid on a bike will make the gate refuse to close. It thinks something is in the way. We realign the eyes and test the safety reverse function before we leave.
Pricing for Gate Repair in Southlake, TX
Gate repair in Southlake runs a wide range because the gates themselves run a wide range. A hinge adjustment on a single swing gate might run $185 to $350. Re-plumbing a shifted post and rebuilding hinge brackets on a 16-foot bi-parting gate typically runs $900 to $1,800. Retrofitting a new operator onto an existing custom iron gate runs $1,800 to $3,400 depending on the leaf weight, the brand, and whether you want smart-access integration. Full automation packages with intercom and camera entry start around $5,000.
You will always know the price before work starts. We quote it, you approve it, we do the job. Our estimates are free, and we offer a Free Second Opinion on any written estimate you’ve received from another company. Senior and veteran customers save 5% on every job, no questions asked.
We Also Serve Cities Near Southlake
Ironworks Gate Co. is the Gate Repair team Southlake homeowners call first, but we send the same trained crews to Colleyville, Grapevine, Bedford, and Keller. If you live just outside Southlake proper, we’ll still get to you quickly, with the same written guarantee on every job. Learn more about our full Gate Repair in Southlake coverage area and what to expect when you call.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Southlake
The black-clay soil under your gate posts is moving. Southlake’s expansive clay swells with winter rain and shrinks in summer heat, which shifts hinge posts a fraction of an inch each year. Adjusting the hinges without re-plumbing the posts treats the symptom, not the cause. We re-set the posts, reinforce the footing, then re-hang the gate so it closes true again.
Yes. Most of the time we can keep your existing ironwork and replace only the operator, arms, and control board. We match the new unit to your gate’s leaf weight and swing geometry, so a 20-year-old custom gate runs like new without touching the metal itself. This is standard work for us in Southlake’s older estate neighborhoods. Call (806) 484-1837 for a free assessment.
The quick test is to open the gate, then place a box or trash can in the gate’s path and try to close it. If the gate reverses or refuses to close, the photo eyes are doing their job. If it keeps closing and hits the object, the photo eyes are misaligned, dirty, or dead. That’s a safety issue. Call us and we’ll test the full safety-reverse system as part of any repair.
After a hard freeze, the most common failures are cracked low-voltage wiring, shorted circuit boards, and seized hydraulic cylinders. Water gets into a conduit, freezes, expands, and damages the wires or seals. We trace the entire low-voltage run, replace what failed, and seal the connections so it doesn’t happen again next winter.
Because the houses on that street were built around the same time, which means the gate operators were installed around the same time. In Southlake’s earliest estate neighborhoods, those original units are all hitting the 20-year failure point together. As we replace them, we retrofit each one to match the existing custom iron, rather than pulling the gate and starting over.
If your gate is sagging, grinding, or dead in the driveway, call Ironworks Gate Co. at (806) 484-1837. We’ll quote the job upfront, do it right, and back it in writing. Free estimates. Live person on the phone. 24 hours a day, 7 days a week.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Southlake homeowners since 1984.