Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across North Richland Hills
When a driveway gate starts sagging, binding, or refusing to close, most North Richland Hills homeowners want one thing: a crew that knows exactly why it failed and can fix it before the week is out. We work on gate hardware and steel every day across NRH, from the established neighborhoods off Rufe Snow Drive to the newer subdivisions east of Davis Boulevard. Our welders and gate technicians carry the hinges, rollers, posts, and latch components that North Richland Hills gates actually need, so most repairs are done in one visit. Call us at (806) 484-1837 and you’ll reach a live person who can schedule your repair or answer a question about your gate, day or night.
Why Ironworks Gate Co. Is North Richland Hills’s Preferred Gate Parts & Welding Company
We’ve been doing this work for over 42 years, and the gates we see in North Richland Hills have a particular set of problems that a general handyman won’t recognize until the gate fails again next spring. The expansive clay under this city moves more than most people realize, and it changes the geometry of a gate every single year. Homeowners here tell us the same thing: they’ve tightened the hinges, replaced a latch, paid someone to “adjust” the gate, and it still sags or scrapes the driveway by summer. That’s because the post itself is moving, not the hinge. We approach every North Richland Hills job by looking at the foundation of the gate first, then the hardware, then the weld work.
We’re background-checked and uniformed on every job, and Victor Salinas, who leads our gate parts and welding work, has been setting posts and welding ornamental steel for decades. The work we do in North Richland Hills is the same work we’d do on our own mothers’ gates: measured, square, and overbuilt where the clay demands it. Most repairs we complete in a single visit, with the price agreed before any work starts.
Key Takeaways for North Richland Hills Homeowners
- Your gate posts move because Tarrant County clay swells and shrinks. This is normal here. The fix is setting posts correctly, not just tightening hardware.
- Hinge replacement on a wrought iron or steel gate in NRH typically runs $180-$420 per hinge set, installed.
- Post replacement, including excavation and re-setting deeper in concrete, runs $450-$1,400 depending on post size, gate weight, and access.
- Every job is covered by our written 90-Day Done Right Promise. No paperwork, no arguing.
- A live person answers our phone 24 hours a day, 7 days a week. Call (806) 484-1837.
Our Gate Parts & Welding Services in North Richland Hills
Our Gate Parts & Welding crew handles the structural and mechanical work that keeps a gate square, rolling, and locking. In North Richland Hills, that means more post work and more weld repair than almost any other gate service category. Here’s what we do most often for homeowners in this city.
Hinge Replacement
Hinges on North Richland Hills gates fail in two ways: the weld fatigues from years of post movement, or the hinge pin wears into an oval and the gate drops. We cut out old barrel hinges, weld in heavier-duty replacements, and shim or re-square the frame so the gate hangs level. For ornamental steel swing gates off Rufe Snow Drive and Mid-Cities Boulevard, we match the original hinge style so the repair doesn’t look like a patch job. Typical hinge replacement in NRH: $180-$420 per hinge set, installed.
Post Replacement
This is the defining gate repair in North Richland Hills. The city’s expansive clay swells every wet winter and shrinks every summer, and over years that cycle torques gate posts out of plumb. We dig out the old footing, inspect the condition of the base steel, and set the new post deeper than the original, often with a surface-mount hinge conversion that breaks the clay’s grip on the post. A typical post replacement in North Richland Hills runs $450-$1,400 depending on post size, gate weight, and whether concrete needs to be broken out. We quote the full price before we start.
Rail Repair
Older wrought iron gates, particularly the ornamental driveway gates installed in the 1980s and 1990s throughout NRH, crack at the rail joints where decades of clay-induced flexing concentrated stress. We weld the crack, brace the joint from the back side when needed, and repaint to match the original finish. Rail crack repair and reinforcement typically runs $150-$450 depending on the length and number of cracks.
Custom Welding
When a custom gate breaks, off-the-shelf parts won’t always work. Our welders fabricate replacement scrolls, spindles, and rail sections to match the original design, then blend the weld so the repair reads as the work of the original fabricator. We also weld new latch brackets, operator mounting plates, and steel reinforcement onto existing gates. Custom welding in North Richland Hills is quoted by the job after we see the gate; most small fabrications run $120-$380, and larger sections or ornamental matching work runs higher. Estimates are free, and we’ll come to you to look at the gate.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in North Richland Hills
Nearly every automated gate in North Richland Hills runs on one of a handful of operator brands, and we’re trained and equipped on all of them. We service LiftMaster, FAAC, Mighty Mule, BFT, Viking, Ghost Controls, DoorKing, Linear, and Elite equipment. That matters when a North Richland Hills gate fails because the last thing you want is a technician who shows up, can’t identify the board, and orders a part with a two-week lead time. We stock common parts locally for NRH customers and can source most others overnight. If your operator is older or has been discontinued, we’ll tell you straight and lay out your options, including retrofit kits that keep your existing gate.
Common Gate Parts & Welding Problems We See in North Richland Hills Homes
- Post-and-footing heave. The clay under a North Richland Hills gate can swell several inches in a wet winter. When the clay lifts the entire post-and-footing assembly rather than just pushing sideways, the gate sags, the latch stops lining up, and hinge bolts shear. We see this repeated every spring in neighborhoods off Davis Boulevard and Precinct Line Road.
- Weld fatigue on 1980s-1990s ornamental gates. Those custom wrought iron driveway gates installed when the city’s housing stock was booming have now seen 30 to 40 years of clay movement. Hairline cracks at the rail joints and hinge welds widen every season. We weld these back stronger and brace them where the original design allows flex.
- Operator failures tied to heat and freeze. North Richland Hills summers push hard past 100°F. Sustained heat warps plastic operator housings and cooks circuit boards on LiftMaster and FAAC units. Then a hard freeze, like the one that hit in February 2021, cracks hydraulic lines and seizes hinges. We replace failed components and can upgrade operators to units rated for Texas heat.
- Gate rollers and track wear on slide gates. Slide gates on North Richland Hills properties with clay soil face constant binding as the ground shifts under the track. Rollers wear unevenly, the rack and pinion grinds, and the operator strains. We inspect roller sets, shim or re-anchor the track, and replace worn rack sections before the operator burns out.
Pricing for Gate Parts & Welding in North Richland Hills, TX
Here’s what you can expect to pay in the North Richland Hills market, based on the work we quote and complete here regularly. Hinge replacement runs $180-$420 per hinge set installed. Post replacement is the big-ticket item and the one most North Richland Hills gates eventually need: $450-$1,400 depending on post size, gate weight, concrete conditions, and access. Rail crack repair runs $150-$450. Custom welding for small fabrications starts around $120 and goes up from there based on material and complexity. Roller and wheel replacement on slide gates typically runs $200-$600 per set with the track checked at the same time.
The price is quoted and agreed before any work begins. You’ll know the cost of every repair or weld before a single bolt is turned or a single bead is laid. We also honor standing offers: $50 off any repair over $250, a free second opinion on any written estimate from another company, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Call (806) 484-1837 for an exact quote for your North Richland Hills gate.
The Clay Problem: Why North Richland Hills Gates Fail on a Schedule
North Richland Hills sits on some of the most expansive clay soils in Tarrant County. These soils swell dramatically during wet winters and springs, then shrink and crack through the brutal summer drought cycle. The movement isn’t subtle: clay can heave several inches in a few months, and anything set in that clay moves with it. For a gate post set in concrete, the swelling clay can lift the entire post-and-footing assembly upward, throwing the gate out of plumb in weeks. Then the summer heat bakes the clay dry, it shrinks, and the post settles back, but rarely to the same position. This continuous cycle is why a gate in North Richland Hills sags every single year even after the hinges are tightened.
We reset the hinge post on a custom ornamental steel swing gate in a subdivision off Davis Boulevard after a wet winter lifted the post-and-footing assembly a full two inches. The gate was binding so hard the Viking operator had overheated twice. Our crew dug out the footing, set the post deeper, and converted to surface-mount hinges to break the clay’s grip on the post. We welded in new heavy-duty hinges and re-squared the frame. That gate has swung silently for over a year now with no sag correction needed. That’s the difference between tightening hardware and fixing the post’s relationship to the soil. In neighboring cities on more stable soils, gates rarely need this level of structural correction. In North Richland Hills, it’s nearly a rite of passage for an older gate.
We Also Serve Cities Near North Richland Hills
Our gate parts and welding crews work throughout the mid-cities. If you’re in Hurst, Haltom City, Bedford, or Colleyville, you get the same service: upfront pricing, welded repairs that hold, and a written 90-Day Done Right Promise on every job. We keep North Richland Hills calls on schedule and can typically reach any address in the surrounding area the same week. See our Gate Parts & Welding in North Richland Hills page for more on how we serve this city and its neighbors.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in North Richland Hills
The gate isn’t sagging because the hinges are loose; the post is moving in the expansive Tarrant County clay. Each wet winter the soil swells and lifts or tilts the post, and each summer it shrinks and settles it differently. Tightening hinges on a moving post is like adjusting your mirrors while the car keeps drifting. The lasting fix is re-setting the post deeper and converting to surface-mount hinges where possible, which breaks the clay’s ability to torque the post. We do this work regularly in North Richland Hills and quote it upfront so you know the price before we start. Call (806) 484-1837 and we’ll look at the post in person.
Yes. We weld the crack with the same process that produced the original joint, then dress and finish the weld to match the surrounding texture. For older ornamental gates in North Richland Hills, we’ll often source matching stock from local steel suppliers or fabricate small scroll and spindle sections ourselves. The repair is meant to look like the original fabricator’s work, not a band-aid. When we quote the job we’ll tell you exactly where the weld will be visible and what it will look like before we strike an arc.
Sometimes, but usually not by itself. When Tarrant County clay heaves, it lifts the entire footing, concrete and all. If we simply set a new post at the original depth, the same clay will heave it again next winter. The fix that lasts is to set the post deeper, often 36 to 48 inches, and use a surface-mount hinge conversion so the hinges no longer depend on a buried post staying perfectly plumb. We’ll assess the soil condition at your North Richland Hills property and give you a straight answer on what the post actually needs.
We re-anchor the track to a stable base, shim it true, and replace worn rollers with heavier-rated sets so the gate rides evenly. If the rack itself has been ground down by repeated binding, we replace that section and realign the pinion. On North Richland Hills slide gates, we also check the operator mount for stress cracks from the strain. The goal is a gate that rolls without fighting the soil underneath it, and we quote the full repair before any work begins. Call (806) 484-1837 for a free estimate. For slide gates specifically, we may recommend a heavier-duty or mid-duty operator if the current unit has been laboring.
After any post or hinge work on an automatic gate, verify the entrapment protection sensors still function: photo eyes aligned, safety edge or contact strip working, and the operator’s reverse-on-obstruction setting responding. A gate that shifted out of alignment can bind against a stop or post and create an entrapment hazard. We test these devices after every structural repair. If a safety device is failed or missing, we’ll flag it and quote the replacement. This is standard practice on every North Richland Hills automated gate we touch.
Call Ironworks Gate Co. for Gate Parts & Welding in North Richland Hills
If your gate is sagging, cracked, grinding, or refusing to open, don’t keep tightening hardware that was never the real problem. We service North Richland Hills and the surrounding mid-cities with welders and gate technicians who understand what this clay does to steel and concrete. We quote every job upfront, we show up when we say we will, and we back every repair with a written 90-Day Done Right Promise. Victor Salinas and the team are ready to look at your gate, explain exactly what it needs, and get it done right the first time. Call (806) 484-1837 for a free estimate. A live person answers, 24 hours a day, 7 days a week.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Richland Hills and the greater Dallas-Fort Worth area since 1984.