Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Arlington
Gate repair in Arlington typically runs $180 to $480 for hinge, post, and realignment work, and $260 to $700 for electric opener and control board repairs. Most jobs are done in one visit. If your gate is binding, sagging, or not opening at all, call (806) 484-1837 and a live person answers, any hour.
We know Arlington’s gates because we’ve worked on hundreds of them, from the 1970s subdivision stock in 76001 and 76002 to the newer ornamental iron driveways off Cooper Street and Park Row in 76003. The Blackland Prairie clay under Arlington moves more than most people realize, and it moves gates with it.
Key Takeaways
- Most Arlington gate repairs cost $180 to $700 depending on whether it’s structural (posts, hinges) or electrical (boards, motors).
- Arlington’s clay soil is the top cause of gate failure here, not rust or impact, and it means posts heave out of plumb on a seasonal cycle.
- We service nine automation brands, including several your original builder likely installed in the 1990s.
- Every job carries the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right.
- Free estimates, upfront pricing agreed before work starts, and a live person on the phone 24/7.
Why Ironworks Gate Co. Is Arlington’s Preferred Gate Repair Company
Ironworks Gate Co. has been hanging, welding, and automating driveway gates for over 42 years. Led by Victor Salinas, our crews work exclusively on gates, nothing else. No handyman side work, no general contracting. That focus means when we drive into an Arlington neighborhood, we already know what we’re likely to find before we park.
Arlington is distinct from the rest of the Metroplex, and we treat it that way. The single-family homes built south of I-20 in the 76001 and 76002 ZIP codes are largely 1970s through 1990s construction: wood privacy fences with drive-through gates, ornamental iron driveway gates on modest lots, and original opener hardware that has now hit its first or second major repair cycle. The issues are predictable. Post footings set shallow, control boards baked by 100-degree summers, hinges worn past the point of shimming. We see it every week.
Our technicians are background-checked and uniformed, and they work the way they would work in their own mother’s driveway. When you call us from Arlington, a live person answers, not a voicemail tree. We will be there when we say.
Our Gate Repair Services in Arlington
Hinge & Post Repair
This is the most common repair we make in Arlington, and it’s rarely because the hardware was cheap. The clay soil under your gate post expands during wet seasons and contracts during dry ones. A post that was perfectly plumb in 1995 can be out by half an inch or more today. We dig out the footing, reset the post in a deeper base with gravel drainage, and re-hang the gate so it closes true. In Arlington, a hinge and post repair typically runs $220 to $450 depending on post size and how far the footing needs to go down.
Gate Realignment
When a swing gate starts dragging on the driveway or a latch strike stops lining up, most people assume the gate is bent. Usually it’s the ground that moved. Arlington sits directly on the Blackland Prairie’s expansive clay, and that soil heaves and settles on a schedule that has nothing to do with storm damage. We realign the gate, adjust the hinges, and when needed reset the post so the problem does not return the next wet season. Realignment in Arlington generally runs $180 to $320.
Electric Gate Repair
Older Arlington homes, especially those built in the 1980s and 1990s, often have original control boards and motors that are obsolete. Thermal stress from sustained 100-degree summers ages capacitors, solder joints, and relays faster than the manufacturer ever intended. We diagnose the exact fault, and when repair is possible we fix it. When the board is no longer manufactured, we retrofit a current model that fits the existing operator or recommend replacement. Electric gate repair in Arlington runs $260 to $700, depending on the component.
Automatic Gate Repair
Automatic gate systems combine mechanical pieces with electrical controls, which means two failure paths. The February 2021 freeze cracked welded joints on a lot of ornamental iron gates in Arlington, and in the same year we saw a surge of seized opener mechanisms from ice expansion. We repair the weld, replace the seized component, and calibrate limits so the operator isn’t fighting the gate. Automatic gate repair in Arlington typically runs $280 to $650.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
We are factory-trained on nine gate automation brands, which means whatever is on your driveway, we’ve already seen it. In Arlington we regularly service Gate Repair systems built around BFT, Linear, and Viking openers, plus Ghost Controls units on newer installations. Many Arlington homes still run DoorKing slide gates from the 1990s. We keep common parts stocked for fast turnaround, so you’re not waiting a week for a capacitor while your driveway is blocked.
Common Gate Repair Problems We See in Arlington Homes
- Heaving posts from clay soil. Arlington’s Blackland Prairie clay can shift a gate post 3/4 inch or more between dry and wet seasons. The gate binds, or the hinges pull, and no amount of WD-40 fixes it. The fix is a properly set post, not a shim.
- Obsolete 1990s control boards. Many Arlington homes still run original 1990s operators, and those boards are no longer manufactured. We can often retrofit a modern board with current safety features rather than replacing the entire operator.
- Hail-dented slide tracks. Arlington sits in the DFW Hail Alley corridor. After a significant hail event, we get a wave of calls from the 76003 area for slide gates whose tracks are dented enough to derail rollers or jam the rack-and-pinion drive.
- Weld cracks from freeze cycles. Ornamental iron gates in Arlington take a beating from ice storms, including the February 2021 freeze. When a weld cracks, it’s rarely isolated; we inspect the entire frame and repair stress points before they fail.
Here’s a specific example. On a 1980s cul-de-sac in the 76002 ZIP, our tech found a DoorKing slide gate whose rack and pinion had stripped because the post footing had heaved a full 3/4 inch during spring rains. We reset the post in a deeper concrete base with gravel drainage, re-hung the rack, and recalibrated the operator’s limits. The gate has cycled smoothly through the next dry-wet cycle. That’s the kind of repair you only learn to make after years of watching Arlington soil do what Arlington soil does.
Pricing for Gate Repair in Arlington, TX
Here’s what you can expect to pay in Arlington, with the understanding that every gate is different and the price is settled before we start work.
- Hinge replacement and adjustment: $180 to $320
- Post reset with concrete footing: $350 to $550 per post
- Gate realignment: $180 to $320
- Electric opener diagnostic and board replacement: $260 to $700
- Weld repair on ornamental iron: $150 to $400 depending on extent
- Slide gate track repair or replacement: $300 to $800
These numbers are based on what we actually charge in Arlington. The soil here makes post work more involved than in cities on sandier ground, and that’s reflected in the post reset range. Every quote is free, and the price we agree on is the price on the invoice. No surprises on the bill.
We Also Serve Cities Near Arlington
Our crews serve Gate Repair in Arlington and the surrounding communities regularly, including Grand Prairie, Hurst, Haltom City, and North Richland Hills. If you’re in one of those areas, the same team, the same parts stock, and the same 90-Day Done Right Promise apply. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office; crews serve Arlington locally.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Arlington
Because Arlington’s clay soil expands when wet and contracts when dry, your gate post moves a small but meaningful amount with the seasons. You’ll notice the gate binds after spring rains and loosens during mid-summer drought. The permanent fix is resetting the post deeper with gravel drainage, not shimming the hinges. Call (806) 484-1837 for a free estimate, and we’ll tell you whether it’s a post problem or a hinge problem before any work is priced.
Yes. In most Arlington homes with 1990s operators, we can add current safety photocells to the existing system. Some older control boards have the input terminals already; others need a small interface board. If your board is dead or obsolete, we’ll quote the retrofit and a board replacement, and you choose. Either way, the price is agreed before the first bolt is turned.
Not necessarily. A dented track can often be straightened or sectioned rather than replaced. We’ll assess how many rollers are affected, whether the rack-and-pinion drive is damaged, and whether the dent is in a load-bearing section. If a full track replacement is cheaper than repeated repairs, we’ll tell you that straight. Call (806) 484-1837 and we’ll come look before quoting anything.
Depends on where the crack is. If the weld cracked because the gate was stressed by frozen, seized hinges, welding alone will fail again unless the hinge issue is addressed first. If the crack is from metal fatigue at a stress point, a proper V-groove weld and gusset will hold. We’ll inspect the entire frame, not just the visible crack, and fix what caused the failure. That’s the difference between a patch and a repair.
Usually the panel. Hailstones in Arlington are large enough to crack the tempered glass on solar panels, and a cracked panel can short internally. But a shorted panel can also damage the charge controller or the operator’s battery. We test the panel output first, then the controller, then the operator. You’ll know exactly which component failed before we replace anything, and the estimate is free.
Call Ironworks Gate Co. for Gate Repair in Arlington
If your gate is sagging, dragging, or dead on its hinges, call (806) 484-1837. A live person answers, 24 hours a day, 7 days a week. We’ll schedule a free estimate, show up when we say, and give you a written price before any work begins. Every job is backed by the 90-Day Done Right Promise.
We’ve been repairing gates for over 42 years. We’re insured and bonded, our techs are background-checked, and we stand behind every job we do in Arlington. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Arlington and the surrounding Metroplex for over 42 years.