Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Keller
Gate repair in Keller, TX usually falls into one of two categories: a mechanical problem with the hinges or post, or an electrical problem with the opener or safety system. Most calls we run in Keller involve both, because most gates here are automated ornamental iron on large estate lots. Call (806) 484-1837 and a live person answers, 24 hours a day. We serve all of Keller’s 76244 and 76248 ZIP codes, and we know the HOA approval process in this city well enough to flag it before it slows your repair down.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Repair Company
We’ve been in this trade since 1984, and the work we do in Keller is different from the work we do anywhere else in the metro. Keller has more automated ornamental iron gates per household than almost any city in Tarrant County, and most of them were installed between 1995 and 2012. That means we’re not showing up to learn your gate. We walk onto a Keller property, see a 20-year-old swing gate on a post that’s heaved with the clay, and we already know what the repair involves.
Our technicians are background-checked and uniformed. They work by a code we call K.E.Y.S.: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. And every job we complete in Keller carries the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork, no arguing.
Gate Repair is all we do. We don’t hang gutters or fix garage doors. That narrow focus matters when a Keller HOA has architectural restrictions on hinge hardware finishes and a property manager needs a company that can document exactly what was replaced and why.
Our Gate Repair Services in Keller
Here’s what we handle most often in Keller, and how each one typically plays out in this city’s specific housing stock.
Automatic Gate Repair
Keller’s master-planned communities, especially around Hidden Lakes and other deed-restricted subdivisions in 76248, run automated swing and slide gates on most estate driveways. When the operator stalls, it’s rarely just the motor. It’s usually a post that shifted in Blackland Prairie clay and put the gate leaf out of alignment, which then makes the operator work against resistance until it errors out. We diagnose the whole system, not just the symptom. Most Keller automatic gate repairs are completed in a single visit, with the price settled before we turn a single bolt.
Hinge & Post Repair
The defining repeat-service problem in Keller is post footing heave. The expansive clay under this city swells when it rains and shrinks when it dries, season after season. A post set in the early 2000s has now been through twenty years of that cycle. It leans, the gate leaf binds against the driveway, and the opener struggles or burns out. We excavate the post, re-pour the footing below frost line, and re-set the gate to factory alignment. This is not a quick shim job. It’s a real repair, and we do it right so it holds.
Gate Realignment
A sagging gate that scrapes the driveway is usually a hinge-post issue, not a gate issue. In Keller, where most gates are heavy ornamental iron on oversized lots, we see this constantly after spring rains. The clay heaves, the post shifts, and the gate drops. We rebuild the hinge post footing, replace worn hinge bearings if needed, and bring the gate leaf back to level. The goal is a gate that opens and closes like it did the day it was hung.
Weld & Rust Repair
North Texas humidity and Keller’s sprinkler systems put moisture directly on gate ironwork. Over 15 to 25 years, that means rust at the bottom rail and weld fatigue at stress points. Our crew includes welders who can repair cracked pickets, rusted-through bottom rails, and failing gate frames on site. We grind, weld, prime, and paint to match, and if we’re in an HOA community in Keller, we already know to ask about architectural approval before changing any visible finish.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We’re trained and equipped on nine gate-automation brands, and in Keller we see a lot of Linear, Viking, and DoorKing operators on estate driveways and community entrances. That matters because each brand has its own failure patterns and calibration procedures. A tech who only knows LiftMaster will guess on a Viking. We carry common boards, limit switches, and photo-eyes for these brands on our trucks, so the correct fix happens on the first visit, whatever is on your driveway. No ordering a part and hoping it arrives before the HOA starts calling.
Common Gate Repair Problems We See in Keller Homes
- Post heave from expansive clay. Keller sits on Blackland Prairie clay that swells with rain and shrinks in drought. Over a 20-year service life, that cycle pushes gate posts out of plumb, binds the gate leaf, and stalls the operator. This is seasonal and recurring, and the fix is a properly re-poured footing, not a temporary shim.
- Hail damage to photo-eyes and control boards. April through June hailstorms in Tarrant County crack photo-eye housings and short control boards mounted on exposed gate columns. The gate still works manually, but the safety system is offline and the keypad stops responding. We test entrapment protection on every Keller call, because a gate that opens but won’t reverse on an obstruction is a serious hazard.
- HOA architectural-review delays. In Keller’s deed-restricted communities, replacing a damaged gate panel, hinge hardware, or even an opener visible from the street can require HOA architectural sign-off before work starts. A tech who doesn’t flag that upfront orders parts, starts the job, and then leaves you holding a stop-work notice from your management company. We flag it on day one and coordinate the paperwork with your HOA or property manager.
- Shared entrance gate failures. Keller’s gated communities run shared slide gates and keypad entry systems that serve dozens or hundreds of homes. When the loop detector fails or the keypad board shorts, every resident is affected. We can often replace a keypad or loop detector without taking the gate fully offline for resident access, because we plan the swap around the traffic flow, not the other way around.
Pricing for Gate Repair in Keller, TX
A hinge and post repair in Keller typically runs $450$900 depending on whether we’re re-pouring a footing or just replacing hinge bearings and re-aligning the leaf. Automatic gate repair, including operator diagnostics and a common part like a limit switch or photo-eye, runs $225$550 in most cases. A full weld and rust repair on an ornamental iron gate frame runs $300$750 depending on how much metal needs to be cut out and replaced. Every price is quoted and agreed in writing before any work starts. No surprises on the bill. Call (806) 484-1837 for a free estimate, and ask about our $89 Seasonal Tune-Up if your gate hasn’t been serviced in over a year.
The Keller HOA Reality: Why Local Knowledge Saves You Time
Here’s what makes Keller different, and it’s not something you’d learn from a generic gate repair website. In Keller’s HOA communities, gate repairs often require architectural-review sign-off before visible hardware or ironwork is replaced. That means a simple hinge swap can become a two-step process: file the request, wait for the committee meeting, then schedule the work. If a tech doesn’t know to ask about that on the first visit, you’re the one who gets stuck with a repair started, parts on order, and a management company demanding the proper paperwork before the gate can be finished.
In the Hidden Lakes master-planned community, our crew reset a leaning driveway swing gate post that had heaved out of alignment after spring rains. The expanded Blackland Prairie clay had shifted the post footing just enough to bind the gate leaf against the ground. We excavated the post, re-poured the footing below frost line, then recalibrated the LiftMaster operator and adjusted the safety photocell to restore entrapment protection and smooth operation. The HOA had already approved the visible hinge hardware through their architectural committee, so there were no delays and no stop-work notices. That’s what a coordinated repair looks like in Keller.
Keller’s late-1990s through 2000s development boom produced a dense concentration of large-lot estate homes and HOA-gated community entrances across the 76244 and 76248 ZIP codes. The city has an unusually high per-capita count of automated ornamental iron driveway and community gates, most now 15 to 25 years old and hitting prime service age simultaneously. That wave of aging automated systems, combined with Tarrant County’s expansive black-clay soil that heaves and settles with every wet-dry cycle, makes gate post misalignment and opener recalibration the defining repeat-service problem in Keller specifically. Neighboring cities like Southlake or Fort Worth don’t experience this at the same concentration, because their housing stock and HOA patterns aren’t shaped by the same 15-year building window. This is the only page that explains how Keller’s HOA approval timelines and Blackland Prairie clay soil interact to turn a simple opener fix into a coordinated, multi-step job.
We Also Serve Cities Near Keller
Our crews run routes through Keller every week and also cover Keller and the surrounding Tarrant County communities, including North Richland Hills, Southlake, Colleyville, and Haltom City. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, but the tech at your gate is a local crew that knows the HOA landscape in Keller and the soil conditions that shape the work here.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Keller
Yes, in most of Keller’s deed-restricted communities, visible gate hardware replacement requires architectural-review sign-off before work begins. We flag it on the first visit, document what needs to be replaced, and coordinate with your HOA or property manager so the repair doesn’t stall midway through. Call (806) 484-1837 and we’ll tell you what your specific community requires.
Keller sits on Blackland Prairie clay that swells with rain and shrinks in drought, and that cycle pushes post footings out of plumb year after year. The permanent fix is excavating the post and re-pouring the footing below frost line. Short-term shims will fail again, usually within one or two wet seasons. For an exact quote, call (806) 484-1837. Estimates are free.
Yes. We plan the swap around your community’s traffic flow, and in most cases we can bring the new keypad online before removing the old one, so residents never lose entry. This is routine work for us in Keller’s gated subdivisions. Call (806) 484-1837 and we’ll coordinate with your property manager on timing.
In most Keller cases, the gate itself is fine and the hinge post is the problem. The clay soil has shifted the post, the gate leaf has dropped, and the opener is working against resistance. We rebuild the post footing, replace worn hinge bearings if needed, and re-align the gate to factory spec. Call (806) 484-1837 for an inspection and a written price.
Yes. Every automatic gate operator in Keller is required to have functioning entrapment protection, typically photo-eyes or an edge sensor, and it must reverse the gate when an obstruction is detected. To test, place a solid object in the gate’s path while it’s closing. If the gate doesn’t reverse, the safety system is offline and you should call us at (806) 484-1837 before using the gate again. This is not something to ignore.
Get Your Keller Gate Repaired Right - and Backed in Writing
If your gate post is leaning, your opener is stalling, or your HOA is asking questions about the rust on the bottom rail, call Ironworks Gate Co. at (806) 484-1837. A live person answers, day or night. We’ll give you a straight answer, a written price, and a repair done right. Every job carries the 90-Day Done Right Promise. No paperwork, no arguing, no exceptions. If it’s not right, we make it right.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller since 1984.