Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Motor & Opener Across Southlake
A gate motor repair in Southlake typically runs $380 to $1,250 depending on the opener brand and what failed, and most repairs are completed in a single visit. A full motor replacement on a custom ornamental gate in Southlake usually lands between $1,800 and $4,600. We’re Ironworks Gate Co., and we’ve spent over 42 years working on gates exactly like the ones lining the private drives off Byron Nelson Parkway, Dove Road, and throughout the 76092 ZIP code. If your gate won’t open, won’t close, or groans like it’s giving up, call (806) 484-1837 and a live person answers, day or night.
Why Ironworks Gate Co. Is Southlake’s Preferred Gate Motor & Opener Company
Southlake isn’t a market where you can send a generalist with a multimeter. The gates here are different. Most of the automated driveway gates in Southlake are custom-fabricated ornamental iron or steel, 12 to 18 feet wide, often bi-parting, and married to intercom systems, keypads, and video entry. The homes behind them are custom estates built from the mid-1990s through the 2010s on half-acre to multi-acre lots. That concentration of bespoke gate infrastructure means the repair company you call needs to understand leaf weight, hinge geometry, and opener torque curves, not just how to replace a circuit board.
Our Gate Motor & Opener technicians are trained and equipped on nine automation brands, including Viking, FAAC, and DoorKing, so the correct fix is made the first time. We arrive in uniform, background-checked, and we quote the price before a single bolt is turned. Homeowners in Southlake have called us for everything from a dead keypad on Southlake Boulevard to a full retrofit on an estate gate near Timarron. The feedback we hear most is that we showed up when we said we would and the gate worked when we left. That’s the bar, and we clear it every day.
Our Gate Motor & Opener Services in Southlake
We work on the full scope of driveway and estate gate automation in Southlake. Below are the services homeowners in the 76092 ZIP code call us for most often.
Motor Installation
Installing a new gate motor in Southlake is rarely a bolt-off, bolt-on job. Most of these gates are heavy custom ironwork hung on posts that have been in the black-clay soil for 15 to 30 years. We evaluate the existing leaf weight, hinge condition, and post plumb before recommending an operator. A properly installed motor on a 16-foot ornamental gate in the Timarron or Monticello areas should run nearly silent and cycle for years without strain. We quote the full installation before work begins and stand behind the job with our written 90-Day Done Right Promise.
Motor Repair
When an opener fails in Southlake, it’s usually one of three culprits: a fried control board, a stripped gearbox, or failing capacitors. On the older hydraulic and electromechanical units found throughout neighborhoods developed between 1995 and 2005, age itself is the enemy. We diagnose quickly, tell you honestly whether a repair makes sense or a retrofit is the better long-term call, and quote the number before we touch a tool. Most motor repairs in Southlake are completed the same day we arrive, with parts we already carry on the truck.
Linear Motor Service
Linear operators are common on Southlake’s sliding driveway gates, especially on wider lots where a swing arc would eat too much of the driveway. These operators use a chain-driven trolley and need regular attention to chain tension, limit switches, and the receiver board. When a Linear motor in Southlake starts laboring or stops mid-travel, it’s often because the chain has stretched or the gate track has shifted with the soil. We service and install Linear operators and keep common Linear parts stocked for fast turnaround.
Slide Motor Installation and Repair
Slide gates on Southlake’s larger estate lots carry some of the heaviest leaf loads we see anywhere in Tarrant County. A slide motor that’s undersized for the gate will burn through gears and capacitors. When we install a slide motor in Southlake, we calculate the actual rolling weight of the gate, check the track and wheels for wear, and size the operator to the load, not to a generic chart. We also verify that safety edges and photo eyes are positioned correctly, because a heavy slide gate is unforgiving if the safety circuit fails.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southlake
Southlake driveways carry a mix of operator brands, and we’re factory-trained on the ones that matter here: Linear, Viking, Ghost Controls, and DoorKing, plus FAAC, BFT, LiftMaster, Elite, and Mighty Mule. That matters because a Viking hydraulic operator on a 1998 estate gate needs different diagnostics than a Ghost Controls unit on a newer swing gate off Southlake Boulevard. We keep common parts for all nine brands in our trucks and in local stock, which means faster repairs and fewer return trips for Southlake homeowners. No matter what’s bolted to your gate, we can service it.
Common Gate Motor & Opener Problems We See in Southlake Homes
Here’s what we’re actually seeing on service calls across Southlake right now:
- Clay-soil post shift and gate sag. The expansive black-clay soils under Tarrant County heave and shrink through wet winters and baked summers. Hinge posts shift out of plumb, the gate leaves sag, and suddenly the operator is fighting the weight instead of moving it. We re-plumb posts and rebalance leaves before the opener tears itself apart.
- Aging 20-year-old operators on custom ironwork. The first wave of Southlake estate neighborhoods, built between 1995 and 2005, are hitting a wall. Original hydraulic and electromechanical operators are failing in clusters, but you can’t just swap in an off-the-shelf opener. The gates are custom, so the retrofit has to match the leaf weight and geometry.
- Ice storm damage to boards and wiring. The February 2021 freeze was the worst recent example, but every ice storm that hits North Texas brings a surge of calls from Southlake. Control boards short, hydraulic cylinders crack, and low-voltage wiring fails in the cold. We see the same pattern after every hard freeze.
- Intercom and access-control mismatches. Southlake homes rarely have a gate motor without an intercom, keypad, or video entry. When a new motor gets installed without proper integration, the gate works but the intercom doesn’t. We make sure both sides talk to each other before we leave the driveway.
Pricing for Gate Motor & Opener in Southlake, TX
Here’s what you can expect to pay in Southlake, based on the jobs we actually do here. A motor repair, like a replaced control board or capacitor, typically runs $380 to $800. A full motor replacement on a standard single swing gate runs $1,800 to $3,200. A custom bi-parting ornamental gate, which is the norm in Southlake’s estate neighborhoods, runs $3,200 to $4,600 because the operator has to be sized to the leaf weight and integrated with existing access control. Slide motor installations on heavy estate gates run $2,400 to $4,200. Intercom integration with a new opener typically adds $300 to $600. Every quote is given in writing, and the price is agreed before any work starts. Call (806) 484-1837 for a free estimate on your specific gate.
We Also Serve Cities Near Southlake
Ironworks Gate Co. serves Gate Motor & Opener in Southlake and the surrounding communities, including Colleyville, Grapevine, Bedford, and Keller. If you’re just outside the 76092 ZIP code, give us a call. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, and crews serve Southlake locally with the same 90-Day Done Right Promise on every job.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Motor & Opener in Southlake
Because those original hydraulic and electromechanical operators are now 20 to 30 years old and have been cycling heavy custom-fabricated iron gates for decades. The gearboxes and clutches wear out from years of moving 12-to-18-foot leaves without proper weight-adjusted tension. In Southlake, we see entire streets where three or four homes need operator work within the same year, simply because the original equipment hit its service life at the same time. The gates themselves are usually still sound, so a careful retrofit beats a full replacement. Call (806) 484-1837 and we’ll tell you whether your operator is worth repairing.
The expansive clay under Southlake expands when wet and shrinks when dry, which shifts hinge posts seasonally by a half-inch or more. That movement throws the gate leaves out of alignment, and the operator ends up fighting the sag until the motor, gearbox, or mounting bracket fails. If your gate has started scraping the ground or the opener sounds strained, the soil is often the root cause. We re-plumb the post and rebalance the leaf before adjusting the opener, which is the only way the repair lasts.
Yes, and this is standard work for us. Nearly every automated gate in Southlake has an intercom, keypad, or video entry system tied to the opener, and a new motor has to communicate with that system to open and close on command. We handle low-voltage wiring, keypad programming, loop detectors, and intercom integration as part of a full motor installation or retrofit. You get one company responsible for the whole job, and the 90-Day Done Right Promise covers the integration too.
For a Southlake estate gate, yes. Ice storms and severe weather knock out power in North Texas often enough that a dead opener means a gate that won’t move and a vehicle that stays trapped on one side. A battery backup system lets you cycle the gate several times during an outage, and it protects the control board from voltage spikes when the grid comes back. It’s a few hundred dollars well spent, and we install them as part of new motor work or as a stand-alone upgrade.
UL 325 is the safety standard that governs automatic gate operators in the United States, requiring features like obstruction sensors, photo eyes, and entrapment protection. It matters in Southlake because heavy ornamental gates can injure a person or damage a vehicle if the safety circuit isn’t working. Our installations comply with UL 325, and when we repair an opener we check that the safety edges, photo eyes, and reversing mechanisms are functioning before we leave. A gate that doesn’t reverse on contact isn’t fixed; it’s just running.
Southlake Gate Motors Done Right
We pulled up to a private drive off Byron Nelson Parkway not long ago for a 16-foot bi-parting ornamental swing gate with a failed Viking operator. The hinge post had shifted in the black-clay soil, so we re-plumbed the post footing and corrected the sag before retrofitting a new FAAC operator sized to the leaf weight. We synced the gate’s in-ground loop detector and keypad entry with the home’s existing intercom, and the gate now runs silent and true. That’s the standard we bring to every gate motor and opener job in Southlake. No surprises on the bill, no waiting until Monday, and a written guarantee on the work. Call (806) 484-1837 for a free estimate, and we’ll be there when we say.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Southlake and the greater Dallas-Fort Worth area since 1984.