Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Parts & Welding Across Haltom City
When a gate hinge snaps or a post leans out of square in Haltom City, you need a shop that understands what this soil does to metal. We do. Ironworks Gate Co. handles gate parts and welding across Haltom City, from Denton Highway commercial slide gates to 1960s ranch-house swing gates on Frost Street and beyond. Most parts and welding jobs on a Haltom City driveway are completed in a single visit, with the price settled before we touch a bolt. Call (806) 484-1837 and a live person answers, day or night.
Why Ironworks Gate Co. Is Haltom City’s Preferred Gate Parts & Welding Company
Our Gate Parts & Welding team has spent decades working Tarrant County metal, and Haltom City is one of the places that keeps us honest. The mix here is unusual. A residential swing gate off Haltom Road was likely hung when the house was built, sometime between the late 1940s and the early 1970s. The hinges are often original, the latch is a style nobody manufactures anymore, and the post sits in black clay that has been heaving for fifty summers. Ten minutes away on NE 28th Street, a salvage yard’s slide gate cycles dozens of times a day under truck traffic. That is a completely different failure profile.
Our crews know both. We show up in uniform, background-checked, and we quote the job before starting. Haltom City customers call us because the last handyman said a gate was unfixable. It usually was not.
Our Gate Parts & Welding Services in Haltom City
Hinge Replacement
A sagging gate on a Haltom City ranch house is almost never a mystery. The hinge post has moved in the clay, or the hinge itself has worn through after decades of swing cycles. We replace hinges with weld-on or bolt-on units matched to the gate’s weight and cycled use, then realign the frame so the latch seats properly. If the post is the problem, it gets addressed, not worked around.
Post Replacement
This is the most common call we make in Haltom City, and the black-clay soil is why. Shallow footings heave in the summer drought, and the post tilts just enough over the years to pull the gate out of square or jam the opener. We cut the old post free, drill a footing below the active clay zone, set the new post in concrete, and rehang the gate so it closes true. Done this way, it stays put.
Rail Repair
For slide gates, especially on the commercial lots along Denton Highway, the rail is doing the heavy lifting every single day. Truck traffic compacts the soil under the track, the rail shifts, and the gate starts binding. We straighten, splice, or replace rail sections and re-level the run. This is a bread-and-butter repair in Haltom City that a residential-only gate company would rarely see.
Custom Welding
When a 1968 chain-link gate has a broken hinge ear and the manufacturer has been out of business for forty years, we fabricate. Our welders build brackets, gussets, latch plates, and complete gate frames in-house. For Haltom City homeowners trying to keep an original gate in service rather than rip out their fence line, custom welding is often the difference between a $200 repair and a $2,500 replacement.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Haltom City
We are trained and equipped on nine major gate-automation brands, so whatever is bolted to your Haltom City gate, we can work on it without calling in someone else. That includes LiftMaster operators on a NE 28th Street slide gate, Mighty Mule and Ghost Controls on acreage swing gates, and FAAC or BFT on the heavier commercial installs. We stock common parts for these systems locally, which means we can usually finish the job on the first visit rather than ordering a board and coming back next week.
Common Gate Parts & Welding Problems We See in Haltom City Homes
- Heaved hinge posts. Black-clay soil under Haltom City shrinks in dry summers and swells in spring rains. The post shifts, the gate droops, the latch misses, and the opener strains. The proper fix is a concrete footing drilled below the active clay zone.
- Obsolete hardware on original gates. Haltom City’s post-war housing stock was fenced with galvanized chain-link and simple swing gates. Hinges and latches from that era are largely discontinued. We match, fabricate, or weld replacements rather than telling you to replace the whole assembly.
- Worn gate rollers on commercial slide gates. The salvage yards and used-car lots along Denton Highway cycle their gates dozens of times daily. Rollers flatten, tracks rack, and motors burn out early. We replace rollers and realign tracks as a standard job, not a special request.
- Corroded frames and weld failures. Tarrant County heat and humidity work on steel steadily. Surface rust becomes structural rust, especially at the bottom rail and hinge points. We cut out the bad section, weld in new steel, and coat it properly.
Pricing for Gate Parts & Welding in Haltom City, TX
Here are straight numbers for Haltom City work. A residential hinge replacement on a standard chain-link or wood-frame swing gate runs $180 to $420 depending on gate weight and whether welding is required. Post replacement with concrete footing work typically runs $350 to $750 per post. Custom welding, like fabricating a latch plate or repairing a cracked frame, runs $120 to $600 depending on the scope. Commercial slide gate roller and track work along the Denton Highway corridor runs $400 to $1,200 based on how much rail needs to be re-leveled. Every quote is written and agreed before work starts. We also offer $50 off any repair over $250, and a permanent 5% senior and veteran discount.
We Also Serve Cities Near Haltom City
Our crews cover Haltom City and the surrounding Tarrant County communities. If you are in North Richland Hills, Hurst, Keller, or Bedford, the same Gate Parts & Welding in Haltom City team handles your gate with the same written guarantee. Call (806) 484-1837 and we will schedule you.
Serving Haltom City, TX - Our Local Coverage Area
We’re based in the Haltom City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Parts & Welding in Haltom City
Haltom City sits on the same deep expansive black-clay soils that stretch across eastern Tarrant County, but the city’s older post-war subdivisions were built with shallower post footings than you typically find in newer North Richland Hills construction. The clay shrinks during summer droughts and swells after rain, and a shallow footing moves with that cycle. The fix is a concrete pour drilled below the active clay zone, which stops the seasonal movement. Call (806) 484-1837 and we will assess your post depth before quoting.
Yes. We do this routinely for Haltom City homeowners with original gates from the 1950s through the 1970s. When a hinge is discontinued, we fabricate a replacement that matches the pivot geometry and weld it into place. The gate keeps its original frame and the latch seats correctly. If the hinge post itself has shifted, we reset it in the same visit so the repair actually holds.
Based on what we see along Denton Highway and NE 28th Street, a high-traffic commercial slide gate needs rollers and track attention every 12 to 24 months. Heavy trucks compact the soil under the track, the rail shifts slightly, and the gate starts to bind. That binding then overloads the motor. A scheduled realignment every year or two is far cheaper than a burned-out operator. We handle both.
They do, and they are a practical choice on the larger lots northeast of the city where running mains power to a gate is expensive. A properly sized solar panel and battery bank will run a Mighty Mule or Ghost Controls swing opener reliably in Tarrant County’s sun. The install matters more than the hardware: the panel needs clear southern exposure and the battery should be sized for cloudy-week cycling. We quote solar opener installs with realistic performance expectations, not brochure numbers.
In most Haltom City cases we see, yes. The hinge post has moved in the clay, not the hinges themselves. The gate frame then goes out of square and the latch end drops. Tightening hinges or adding a wheel helps for a month or two, but the post keeps moving. The lasting fix is pulling the old post, drilling a footing down through the active clay zone, and setting a new post in concrete. Then we rehang the gate and it closes square for years, not months.
Contact Ironworks Gate Co. for Gate Parts & Welding in Haltom City
When your gate is down or dragging, call (806) 484-1837. A live person answers, 24 hours a day, seven days a week. We will schedule a Haltom City visit, quote the work in writing before anything starts, and stand behind it with our 90-Day Done Right Promise. That is the Keystone Standard on every job we do.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Haltom City and the surrounding Tarrant County communities.