Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Keller, TX
A gate that won’t open is more than a hassle in Keller - and our Southlake service area sees the same urgency. It’s a car stuck in the driveway at 6:45 on a Tuesday morning, a delivery driver backing into the street, a house that suddenly feels less like home. The good news: most gate repairs in Keller are completed in a single visit when the technician understands both the ironwork and the motor. That’s what we do at Ironworks Gate Co. Call (806) 484-1837 and you’ll get a live person, not a voicemail, 24 hours a day. We know the gates in this town because we work on them every week, and we stand behind every repair with a written 90-Day Done Right Promise.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Keller Homeowners Choose Ironworks Gate Co.
Keller homeowners don’t want to shop around. They want the gate fixed right, once, by someone who answers the phone. Victor Salinas leads a crew that has spent more than four decades earning that trust across our North Richland Hills service area and the broader region. We’re background-checked, uniformed, and trained on nine gate-automation brands, including LiftMaster, DoorKing, and Ghost Controls, so the correct diagnosis happens on the first visit. In neighborhoods like Marshall Ridge and Hidden Lakes, our technicians have reset misaligned swing gates, replaced burned-out control boards after spring hailstorms, and rebuilt sagging ornamental leaves that would not close square. One visit, one straight answer, one written guarantee. That’s the whole model.
Gate Repair Services We Offer in Keller
Gate Repair
Broken hinge, bent picket, a leaf dragging on the concrete, or a post that has heaved out of plumb. We weld, straighten, shim, and recalibrate until the gate swings true and closes square. Most repairs in Keller are handled in one visit, with the price quoted and agreed before any work starts. Learn more about our Gate Repair in Keller.
Gate Installation
New construction, a replacement for a failed gate, or an upgrade to automation. We measure, source the iron and hardware, and install to last through decades of Tarrant County weather. No surprises on the invoice, no shortcuts on the work. Learn more about our Gate Installation in Keller.
Gate Motor & Opener
When the motor hums but the gate doesn’t move, or the opener beeps and stalls, the issue is usually a limit switch, capacitor, or gear. We carry parts for nine major brands, including Linear and Viking, and we’ll tell you honestly if repair beats replacement. Learn more about our Gate Motor & Opener in Keller.
Gate Access Control
Gate Access Control - Keller covers keypads, intercoms, photo-eye sensors, and remote systems. When hail takes out a sensor or a keypad stops accepting codes, we troubleshoot the wiring and the hardware in one pass. Every repair protected by the 90-Day Done Right Promise.
Gate Parts & Welding
Our Keller Gate Parts & Welding team fabricates and welds replacement pickets, hinge plates, latch bars, and reinforcement gussets on site. If the part can be repaired stronger than a generic replacement, that’s what we recommend. A square deal, always.
Return to our home page for company details and standing offers.
Neighborhoods We Serve in Keller
We run calls across both Keller ZIP codes, 76244 and 76248, from the HOA-gated communities near Keller Hicks Road to the estate lots off Mount Gilead Road and along Rapp Road south of 1709. Typical response is same-day for repair calls, and we arrive with the common parts for your gate type already on the truck.
- Hidden Lakes
- Marshall Ridge
- Willis Creek Estates
- Melody Hills
- Creekwood
Why Keller’s Climate and Housing Affect Gate Repair
Keller’s late-1990s through 2000s development boom left the city with an unusually high number of automated ornamental iron driveway gates and HOA community entrances. Most of those systems are now 15 to 25 years old, which means controllers are failing, gearboxes are wearing out, and limit switches are drifting, all at roughly the same time. Under the gates sits Blackland Prairie clay. It swells after rain and shrinks in drought, and every wet-dry cycle nudges gate posts a fraction further out of alignment. We see the same pattern all over 76244 and 76248: an opener that worked fine in October starts binding in April after the spring rains, not because the motor failed but because the post leaned and threw the leaf out of square. Keller is one of the only places we work where post realignment and opener recalibration are the default first repair, before we even look at the motor.
Pricing for Gate Repair in Keller
Expect honest, upfront numbers before a single bolt gets turned. Minor repairs like hinge lubrication and limit-switch adjustment typically run $95 to $220. Welding a cracked picket or reinforcing a sagging leaf generally falls between $150 and $350 depending on the extent of the damage. Replacing a control board or photo-eye sensor runs $200 to $480 including the part. Post realignment on shifted clay soil, common across Keller, runs $180 to $400 when we can reset without replacing concrete. We quote the full price, you approve it, we do the work. Nobody gets a bill bigger than the number we agreed to. Call (806) 484-1837 for an exact quote. Estimates are free.
Service Area - Cities Near Keller
Ironworks Gate Co. serves Keller and the surrounding Tarrant County communities. If you’re in North Richland Hills, Southlake, Colleyville, or Haltom City, the same crew and the same written guarantee apply.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Keller
Most gate repairs in Keller run between $95 and $480, with post realignment from clay-soil shifting accounting for many calls in the 76244 and 76248 ZIP codes. The exact price is always quoted and approved before work begins. Call (806) 484-1837 for a free estimate on your specific gate.
Yes. We offer same-day service for repair calls throughout Keller, and a live person answers the phone 24 hours a day, 7 days a week. When you call (806) 484-1837, we’ll tell you exactly when the truck will arrive.
Keller’s Blackland Prairie clay soil swells when wet, which shifts gate posts and throws the automated leaves out of alignment. The opener then binds, stalls, or trips its safety stop. This is a seasonal failure pattern we correct with post shimming and opener recalibration, not a sign that you need a new gate.
In many Keller HOA communities, replacing visible hardware or ironwork requires architectural-review sign-off before the work proceeds. We flag that requirement on the first visit so parts don’t get ordered until the approval is in hand. It saves time and avoids a property-manager headache later.
Most likely yes. We’re trained and equipped on nine major gate-automation brands, including LiftMaster, DoorKing, Linear, Viking, Ghost Controls, and Mighty Mule. Tell us what’s on your driveway when you call (806) 484-1837 and we’ll bring the right parts on the first trip.
Call Ironworks Gate Co. for Gate Repair in Keller
When your gate stops working, you don’t need a callback queue. You need a technician who knows Keller’s gates, Keller’s soil, and Keller’s HOAs, and who will quote the price before the work starts. We answer the phone 24 hours a day. Call (806) 484-1837 for a free estimate, a free second opinion on any written bid, or simply a straight answer about what’s wrong with your gate. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller and the Dallas-Fort Worth metroplex. Dispatch and scheduling are coordinated from the company’s Dallas-Fort Worth office, with crews serving Keller locally.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Keller Customers Say
"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram"Used them at two properties now. Both times they diagnosed it on the first visit instead of guessing and coming back."
- Rohan Shah"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and put a surge protector on the line so hopefully it does not happen again."
- Layla Haddad