Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in Hurst, TX
Most gate repairs in Hurst come down to one of three things: a post that has shifted in the Blackland Prairie clay, a hinge or weld that has finally let go after decades of use, or an opener that has quit without warning. We get all three back to working order, usually in one visit. If your gate is sagging, dragging, refusing to open, or groaning like it’s done for the day, call us at (806) 484-1837. A live person answers, any hour, and we’ll tell you honestly what you’re dealing with.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why Hurst Homeowners Choose Ironworks Gate Co.
Hurst is a town of established homes and established expectations. The people who call us in Bellaire Heights or along the streets off Precinct Line Road have usually lived there twenty, thirty, sometimes forty years. They’ve already had a bad experience with a generalist who “does gates too.” That’s why they call a company that does nothing else. Victor Salinas and our crews carry ironworker’s welding certifications and factory training on nine gate-opener brands, so the diagnosis is right the first time. We cover Hurst with background-checked, uniformed technicians, and every completed job carries the written 90-Day Done Right Promise. If it’s not right, we return and make it right. No paperwork, no argument.
What Hurst Homeowners Should Look For
When you’re comparing gate repair companies in Hurst, ask the questions that separate a gate specialist from a handyman with a truck. Here’s the comparison that matters:
- Does the company weld, or just bolt? A sagging steel gate in Hurst needs a welder on site, not a bolt-together patch. We are a welding company first.
- How many opener brands do they actually train on? We’re factory-trained on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If a technician only knows one brand, you’ll hear “it’s time to replace it” too often.
- Is the guarantee written? Ours is. The 90-Day Done Right Promise is stated on the work order before you sign. You’ll never have to argue about it.
- Will a real person answer the phone? When your gate is stuck open at night, you don’t want a callback queue. You get a live voice at (806) 484-1837, 24 hours a day.
Gate Repair Services We Offer in Hurst
Gate Repair
Steel and wood gates in Hurst fail most often at the hinge, the post, or the weld. We inspect all three on every call and repair what actually caused the problem, not just the visible symptom. A gate that scrapes the ground in spring has usually shifted with the clay; we reset the post and re-square the frame so it closes like it should.
Learn more about our Gate Repair in Hurst.
Gate Installation
A new gate in Hurst starts with the question of the soil. We set posts deeper than the active shrink-swell zone so the gate doesn’t heave in two years. Your new gate is built, welded, hung, and adjusted on site, then backed by the same 90-Day Done Right Promise as any repair.
Learn more about our Gate Installation in Hurst.
Gate Motor & Opener
Whether it’s a LiftMaster on a driveway gate or a Mighty Mule on a backyard fence gate, we diagnose the board, the limit switches, the capacitor, and the arm before recommending any replacement. Most opener failures in Hurst are a $90-$180 part, not a full motor.
Learn more about our Gate Motor & Opener in Hurst.
Gate Access Control
Keypads, intercoms, vehicle sensors, and phone-entry systems all age with sun and rain. We service and replace Gate Access Control - Hurst on estate gates and residential driveway gates across Hurst, and we wire it so the safety loops and edges work the way code requires.
Gate Parts & Welding
Hinges, latch posts, receiver brackets, bottom rails, picket replacements, and cracked welds. We fabricate Hurst Gate Parts & Welding on site when an off-the-shelf piece won’t hold, and our welds carry the same written promise as the rest of the gate.
Neighborhoods We Serve in Hurst
We work throughout Hurst and the North Richland Hills service area, from the tree-lined streets of Bellaire Heights to the neighborhoods around Shady Oaks and the older subdivisions off Brown Trail and Pipeline Road. Crews typically reach any Hurst home within a few hours of your call, same day for most repairs.
- Bellaire Heights
- Shady Oaks
- North of NE Mall corridor
- Streets off Brown Trail
- Precinct Line Road area
Why Hurst’s Climate & Housing Affect Gate Repair
Hurst developed fast in the 1960s and 1970s, and most of its homes are brick ranch-style houses from that era. That means most wooden privacy gates in this city are now on their second or even third swing, and the original posts underneath them are often only 18 to 24 inches deep. The Blackland Prairie clay under Hurst is a shrink-swell soil: it drinks up spring rain and swells, then bakes hard and cracks every summer. A post set shallow in that soil will lean a little more north every season, and the gate attached to it twists out of square until the latch no longer lines up and the hinges carry the whole weight. We see this exact failure across Hurst all year. The fix is not a hinge shim. It’s pulling the post, digging below the active soil zone, and setting it again in concrete at a depth the clay can’t move. Then the gate gets re-hung square, so the next ten years don’t repeat the last ten.
Winter ice storms also hit the DFW Mid-Cities hard. Ice builds on the top rail of a wooden gate and cracks it, or a frozen latch post splits under the load. And in summer, gates that were fine in April will drag across a driveway in August because the ground has dropped a quarter inch under every post. Hurst gates live a harder life than gates in most of the country, and the repair needs to account for that.
Pricing for Gate Repair in Hurst
Here’s what we quote for the most common gate repairs in Hurst, before any work begins. The price is agreed on paper first. No surprises on the bill.
- Gate hinge replacement (pair, steel or heavy wood): $180-$320
- Post reset below frost/active soil line: $350-$650 depending on post size and concrete conditions
- Opener control board replacement: $140-$380 depending on brand
- Welded frame repair (typical 10-12 foot steel gate): $220-$500
- Full wood gate rebuild (standard 6 foot): $450-$900 depending on height and hardware
You’ll always know the full cost before we turn a single bolt. We also honor a standing $50 off any repair over $250 and a 5% discount for seniors and veterans, every day.
Service Area - Cities Near Hurst
In addition to Hurst, we serve the surrounding Mid-Cities communities with the same promise and same local crews. If you’re in North Richland Hills, Bedford, Colleyville, or Haltom City, the same team that covers Hurst can be at your gate this week.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area, serving Bedford, TX, and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Hurst
Most gate repairs in Hurst run between $180 and $500, with full rebuilds or post resets landing higher depending on what’s under the ground. Hinge replacements and opener boards are on the lower end. The number that stings is the post reset, because Hurst clay demands a deeper hole than many original builders dug. You’ll get a written price before any work starts. Call (806) 484-1837 for an exact quote; estimates are free.
For most repairs, yes. Gates that won’t close or won’t open are emergencies, especially if there’s a dog or a pool in the yard. We keep same-day availability for repair calls in Hurst, and a live person answers at (806) 484-1837 any hour, day or night.
The heavy Blackland Prairie clay under Hurst swells with spring rain and lifts anything set shallow in it. Your gate post was likely set 18 to 24 inches deep in the 1960s or 70s, which was never enough for this soil. We pull it, dig below the active zone, and set it right. That’s the only repair that lasts in this city.
We train on and repair nine major brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. If your opener is one of these, we’ll have the parts and the know-how on the truck when we arrive. Call (806) 484-1837 with the brand name and we’ll bring what’s needed.
Yes. We offer $50 off any repair over $250, a free second opinion on any written estimate you’ve received, an $89 seasonal tune-up, and a permanent 5% discount for seniors and veterans. Mention any of these when you call and they’re applied to your quote, in writing.
If your gate is acting up in Hurst, call (806) 484-1837 now. You’ll speak with a person, get a straight answer, and know the price before we ever set foot on your property. Done right, and backed in writing.
Written by Victor Salinas, Owner at Ironworks Gate Co., providing gate repair, installation, and automation services to homeowners across the Dallas-Fort Worth metro, including Hurst, Texas.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Hurst Customers Say
"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram