Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Keller
Gate installation in Keller typically runs $2,800 to $9,500 for a complete automated driveway gate, and most jobs take two to four working days from measure to final walkthrough. That’s the honest range for this city’s housing stock: larger estate lots, ornamental iron, and HOA review requirements that most general contractors never flag until it costs you time. Our crews serve Keller from the Dallas-Fort Worth office, and a live person answers when you call (806) 484-1837. If you’re replacing a builder-grade operator on a double swing gate off Bear Creek Parkway, or automating a manual gate that was poured without conduit in 2003, we know exactly what you’re up against before we set foot on the property.
Why Ironworks Gate Co. Is Keller’s Preferred Gate Installation Company
We’ve been at this for over 42 years, founded in 1984, and the work we do in Keller reflects that. Victor Salinas runs the crews with one rule from the K.E.Y.S. code: Krafted right, Every time, Your home first, Standing behind it. The 400th job gets the same care as the first. In Keller, that matters because most of the gates we touch were installed during the late-1990s and 2000s building surge, and too many of them got operator hardware that was undersized for ornamental iron. Our background-checked, uniformed technicians see that on the first visit, not the third.
Our reputation in Keller is built on showing up when we say and quoting a price before a single bolt is turned. Homeowners here tend to be long-timers, people who’ve lived in the same house on the same lot for twenty years. They remember contractors who disappeared. We’re the company that plans to be in town for another forty. Every job carries the 90-Day Done Right Promise in writing. If it’s not right, we come back and make it right. No paperwork, no arguing. That’s the Keystone Standard, written on the estimate.
Our Gate Installation Services in Keller
We install and automate the full range of gates you find in Keller’s master-planned communities, from private driveway swing gates to shared HOA entrance systems. Our Gate Installation team handles the heavy lifting, but here’s what that means specifically for Keller property owners.
Driveway Gate
Keller’s estate lots, especially across the 76244 and 76248 ZIP codes, were built for impressive entrances. A driveway gate here usually means ornamental iron, often 14 to 16 feet wide, and it needs an operator rated for that weight. We size the operator to the gate, not to the contractor’s inventory. We also run the conduit, power, and safety photocells correctly the first time, because trenching across a Keller driveway twice is an expense nobody should eat.
Pedestrian Gate
Most Keller homes with a driveway gate also need a separate pedestrian gate, whether it’s a matching iron walkway gate or a simpler steel frame. These get used daily and the hinges take abuse. We set posts below the clay-active zone where we can, using deeper footings than the original builders typically poured, so the gate still latches true through wet-dry cycles.
Sliding Gate
Sliding gates make sense on Keller lots where a driveway slopes toward the street or where a swing gate would block the apron. The catch is that Blackland Prairie clay settlement throws the track out of level, and then the gate drags or jams. We install slide systems with adjustable track and proper drainage so seasonal movement is manageable, not a recurring repair.
Swing Gate
Double swing gates are the signature entrance across Keller’s HOA communities. They’re also the most sensitive to post heave. When clay expands, hinge posts shift and the leaves no longer meet in the center. We set corrected footings, reinforce hinge posts, and calibrate the operator to the actual gate weight, not the spec sheet.
Double Gate
A double gate doubles the load on the opener and doubles the alignment variables. In Keller, where many of these were installed during the 1995-2012 window with builder-grade operators, failure comes early. We typically replace those with properly rated automation from Linear or DoorKing and adjust the leaf sequencing so both panels move without fighting each other.
Security Gate
A security gate in Keller isn’t just about looks. It’s about actually controlling who drives onto your property. We add keypads, intercoms, and vehicle detection loops, and we wire it all to code. For HOA community entrances in the 76248 ZIP, we know the architectural review drill: submit the hardware changes before ordering iron, and you avoid a stalled project.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We’re trained and equipped on nine gate-automation brands, including Linear, Viking, Ghost Controls, and DoorKing. That matters because Keller’s existing gates carry a mix of whatever the original builder could get at volume pricing, and we don’t have to guess. The correct board, arm, or limit switch is identified on the first visit. We keep common parts stocked for Keller service calls, which means less waiting on a distributor and more one-visit jobs.
Common Gate Installation Problems We See in Keller Homes
- Builder-grade operators on heavy iron gates. Homes built from 1995 through 2012 in Keller’s subdivisions often got entry-level openers paired with ornamental iron gates that weigh far more than the operator’s rated capacity. The result is premature motor failure, burned control boards, and a gate that quits mid-cycle on the hottest August afternoon. We replace the operator with one matched to the measured gate weight.
- Missing conduit and power runs on manual gates. Many Keller homeowners bought homes with manual gates and later want automation. The original install rarely left conduit in the ground or power at the hinge or receiver post. Running that line correctly requires trenching across the driveway apron or along the fence line, and we do it without tearing up more of the yard than necessary.
- Clay heave throwing posts out of alignment. Tarrant County’s expansive Blackland Prairie clay shrinks in drought and swells after rain. That seasonal movement racks hinge posts and shifts swing gate leaves so they bind or fail to latch. Keller sees this as a recurring, not one-time, correction. Proper post depth and concrete collars reduce how often recalibration is needed.
- Hail damage to exposed components. North Texas hailstorms from April through June wreck photo-eye sensors, control boards, and intercom keypads mounted on exposed gate columns. Insurance claims are common, and we document damaged components with photos you can hand your adjuster.
Pricing for Gate Installation in Keller, TX
Here are real ranges for Keller, not regional averages pulled from a national site. A basic single swing driveway gate with manual operation runs $2,800 to $4,200. Add automation and a quality opener and you’re at $5,500 to $8,000. A double swing ornamental iron gate with automation, keypad, safety photocells, and proper conduit runs $7,500 to $12,500. Sliding gate installations typically land between $6,500 and $10,000 depending on track length and whether the driveway needs a concrete pad. The price you’re quoted is the price you pay. We settle the number before work starts, and every job carries the 90-Day Done Right Promise in writing. Call (806) 484-1837 for a free measure and written estimate.
Cost factors in Keller:
- Gate size and material weight (ornamental iron costs more than steel tube frame)
- Whether power already exists at the gate location
- Needed trenching or conduit work across driveway or landscaping
- HOA architectural review requirements for visible ironwork changes
- Operator brand and capacity rating
We Also Serve Cities Near Keller
Our crews work throughout the northeast Tarrant County area, including North Richland Hills, Southlake, Colleyville, and Haltom City. Whether you’re in Keller proper or just across the city line, the same written promise applies. For more on our local coverage, see Gate Installation in Keller and the surrounding service area.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Keller
The Blackland Prairie clay under Keller expands and contracts dramatically between wet and dry seasons, and that movement heaves gate posts out of plumb. Many original posts in the 76244 area were set in shallow concrete that doesn’t extend below the active clay zone. We pour deeper, wider footings with compacted base rock so the post stays put through the seasonal cycles, rather than being corrected every spring.
In most Keller HOA-governed subdivisions, yes. Visible changes to gate hardware or ironwork typically require architectural review committee sign-off before work begins. We flag that on day one and prepare the submittal with you, which keeps the project moving instead of stalling mid-install while a board debates your iron finish. Call (806) 484-1837 and we’ll walk you through what your specific community requires.
Yes. Manual gates built during Keller’s housing boom often lack the underground conduit and electrical run needed for an operator. We trench and run new conduit, install the power feed, and mount the operator, safety edges, and photocells to code. The work takes longer than a simple operator swap, but it gets done right and the price is set before we start digging.
Clay movement under Keller’s slide gate tracks is the usual culprit. As the Blackland Prairie soil swells and shrinks, the track loses level and the gate wheels bind, which overloads the operator motor and control board. We install slide systems on reinforced track bases with drainage so the gate keeps rolling instead of fighting the ground. Call (806) 484-1837 for an evaluation and written quote.
Hail from April through June smashes photo-eye lenses, cracks control board enclosures, and shorts keypad wiring mounted on exposed columns. The damage is often invisible until the gate fails a few weeks later. We inspect storm-damaged systems, document findings for your insurance claim, and replace broken components with rated parts. Estimates are free.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving Keller and the greater Dallas-Fort Worth area since 1984.