Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair Services in North Richland Hills, TX
When a gate stops opening in North Richland Hills, you need someone who understands why it failed. Ironworks Gate Co. repairs driveway gates, swing gates, slide gates, and the operators that run them throughout North Richland Hills, TX, with most jobs completed in a single visit. Call (806) 484-1837 any hour, any day. A live person answers. And before we turn a single bolt, you’ll know exactly what the repair costs, because the price is quoted and agreed in writing before any work begins.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Why North Richland Hills Homeowners Choose Ironworks Gate Co.
The clay soil beneath North Richland Hills never sits still. It swells in wet months, shrinks in the summer heat, and slowly works against every gate post and hinge in the neighborhood. Homeowners off Rufe Snow Drive and in the established subdivisions around Mid-Cities Boulevard call us because we know what that movement does to a gate, and we fix it in a way that holds. Our technicians are background-checked and uniformed, and they work in your driveway the way they would work in their own mother’s. Every job is protected by a written 90-Day Done Right Promise: if it is not right, we come back and make it right. No arguing, no paperwork. We are trained and equipped on nine gate-automation brands, including LiftMaster, Mighty Mule, and FAAC, so the correct fix is made on the first visit, whatever is bolted to your driveway.
When a home in the Davis Boulevard corridor needs a gate post re-set because the clay lifted the footing, or a neighborhood near Precinct Line Road has a cedar gate dragging on the concrete, we are already familiar with that failure pattern. That is what a gate specialist does. Generalist handymen guess; we diagnose. And we put the diagnosis in writing before you spend a dollar.
Gate Repair Services We Offer in North Richland Hills
Gate Repair
Sagging gates, misaligned latches, broken hinges, seized rollers, bent frames. We straighten, reinforce, replace, and weld what needs welding, and we use heavier hardware where the original installation was undersized. Most repairs in North Richland Hills happen same-visit.
Learn more about our Gate Repair in North Richland Hills.
Gate Installation
A new gate should be measured, built, and hung to fit your driveway and your soil, not ordered from a catalog and forced to fit. We install driveway and estate gates sized for the opening, with hardware rated for decades of North Texas clay movement. Every installation begins with a free measure and a written price.
Learn more about our Gate Installation in North Richland Hills.
Gate Motor & Opener
Operators fail from heat, freeze, and storms, and North Richland Hills delivers all three. We service nine automation brands, including LiftMaster, Mighty Mule, BFT, and FAAC, and we carry the common parts on the truck so the correct fix usually happens on the first trip.
Learn more about our Gate Motor & Opener in North Richland Hills.
Gate Access Control
Keypads, intercoms, vehicle detectors, and remotes. We install and repair Gate Access Control - North Richland Hills on residential and light commercial gates so the people you want get in, and the people you don’t want don’t. Systems are tested through the full range of use before we leave.
Call (806) 484-1837 to schedule access control work in North Richland Hills.
Gate Parts & Welding
When a hinge tears loose or a steel frame cracks, we weld it back stronger than it was through our Gate Parts & Welding in North Richland Hills, and we replace worn parts with heavier-gauge hardware where the original was too light. For automated gates, we handle operator arms, safety edges, and remotes so the gate works safely. Note: gate springs and tensioners are under load. We diagnose and repair them safely, and we don’t recommend a homeowner take that on without proper tools and experience.
Call (806) 484-1837 for parts and welding in North Richland Hills.
Neighborhoods We Serve in North Richland Hills
Ironworks Gate Co. serves the entire city of North Richland Hills. Our techs work regularly in the established neighborhoods off Davis Boulevard, around Rufe Snow Drive, near Precinct Line Road, in the Mid-Cities Boulevard corridor, and through the 76180 and 76182 ZIP codes. Response time across North Richland Hills is typically same-day or next-day for repair calls, and emergency gate failures are handled as quickly as a technician can reach you.
Why North Richland Hills’s Climate & Housing Affect Gate Repair
North Richland Hills sits on the expansive clay soils of Tarrant County, and that single fact shapes gate repair work here more than any other. The clay swells several inches during wet winters and springs, then shrinks and cracks through the summer drought cycle. Each cycle torques gate posts slightly out of plumb. Ten years of that is enough to drag a gate across the concrete, spring a latch, and pop a hinge. In neighborhoods built through the 1970s and 1980s off Davis Boulevard and Precinct Line Road, we see a failure called concrete heaving, where the clay literally lifts the post-and-footing assembly out of the ground rather than just shifting it. The fix is heavier: re-set the post deeper, add a stronger footing, or switch to surface-mount hardware that breaks the clay’s grip. It is a repair pattern our technicians know from doing it here, not from reading about it.
The climate makes it worse. Sustained 100-degree summers warp plastic operator components and fry circuit boards. The hard freeze of February 2021 cracked hydraulic lines and seized hinges that had already loosened from soil movement. A gate in North Richland Hills doesn’t fail once. It fails on an annual rhythm tied to the weather, which is why our $89 seasonal tune-up exists: most homeowners would rather pay a small amount every season than one large amount every few years.
Pricing for Gate Repair in North Richland Hills
Every quote is written and agreed before work begins. No surprises on the bill, ever. Here is what North Richland Hills homeowners typically see:
- Gate tune-up (seasonal maintenance): $89
- Hinge replacement (standard steel): $140-$260 per hinge
- Gate post re-set in clay soil: $320-$580, depending on depth and footing condition
- Operator circuit board replacement: $250-$450, depending on brand and model
- Latch and alignment repair: $90-$220
- Welding repair (cracked frame or broken hinge plate): $150-$400, depending on extent
We honor a permanent $50 off any repair over $250, a free second opinion on any written estimate, and a 5% discount for seniors and veterans. Call (806) 484-1837 for an exact quote. Estimates are free.
Service Area - Cities Near North Richland Hills
While most of our gate work is in North Richland Hills and the immediate 76180 and 76182 areas, we also serve neighboring communities including Hurst, Haltom City, Bedford, and Colleyville. If you’re just over the city line, call us. We’ll tell you honestly if we can reach you.
Serving North Richland Hills, TX - Our Local Coverage Area
We’re based in the North Richland Hills area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in North Richland Hills
Most repairs in North Richland Hills land between $90 and $580, depending on whether the problem is a misaligned latch or a post that the clay soil has heaved out of the ground. Operator circuit boards run $250-$450. Every quote is written before any work starts, and there is no charge for the estimate. Call (806) 484-1837 for a firm number on your gate.
Usually, yes. Repair calls in North Richland Hills are typically handled same-day or next-day, and if your gate is stuck open or stuck closed leaving your property exposed or your car trapped, tell us when you call, and we will treat it as a priority. A live person answers 24 hours a day, 7 days a week at (806) 484-1837.
The expansive clay soil under North Richland Hills swells and shrinks with rainfall and drought, which continuously torques gate posts out of plumb. That ground movement is why a gate that was perfect five years ago is now dragging or failing to latch. We re-set posts deeper, sometimes using surface-mount hardware, and we select hardware sized to resist the movement. It is a local condition we repair for, not around.
First, check the breaker and confirm the gate is not in a locked or manual-release position, then listen for a humming sound when you try to open it. That hum usually means the motor is getting power but the limit switch or capacitor has failed. If you smell burnt electronics or see scorch marks on the board, do not keep trying; power it down. Automated gate operators involve line voltage and, in some models, high-tension springs. Our techs diagnose the exact failure and fix it on the first visit in most cases. Call (806) 484-1837 and we will walk you through what you are seeing.
Yes. Every job we complete, from a simple latch adjustment to a full operator replacement, carries the 90-Day Done Right Promise in writing. If it is not right, we come back and make it right. No paperwork, no arguing. We stand behind it. Call (806) 484-1837 and the person who answers can explain exactly what the coverage includes.
If your gate is sagging, grinding, stuck, or dead in North Richland Hills, call Ironworks Gate Co. at (806) 484-1837. You’ll reach a real person, get a straight answer, and get a written price before any work begins. We are the gate specialists that North Richland Hills homeowners call when they are done calling everyone else.
Written by Victor Salinas, Owner at Ironworks Gate Co., serving North Richland Hills and the surrounding Tarrant County communities.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What North Richland Hills Customers Say
"The gate works properly now and the price was fair. It did take two visits, because the operator we have is old and the part had to be ordered. They did not charge for the second trip."
- Carrie Mercer"Our slide gate had been dragging for months and getting worse. The chain was stretched and a guide roller had seized. Both replaced, and he reset the limits so it stops properly at each end now."
- Veronica Ramirez"Reprogrammed every clicker in the community and set up the keypad codes. Patient with a very long list of residents."
- Devon Ingram